lkml.org 
[lkml]   [2016]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/16] mtd: nand: sunxi: fix ->dev_ready() implementation
Date
->dev_ready() is not supposed to wait for busy to ready solution (this is
the role of ->waitfunc()).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/sunxi_nand.c | 7 -------
1 file changed, 7 deletions(-)

diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 9816cda..79c90fd 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -358,7 +358,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
struct sunxi_nand_rb *rb;
- unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20);
int ret;

if (sunxi_nand->selected < 0)
@@ -370,12 +369,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
case RB_NATIVE:
ret = !!(readl(nfc->regs + NFC_REG_ST) &
NFC_RB_STATE(rb->info.nativeid));
- if (ret)
- break;
-
- sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo);
- ret = !!(readl(nfc->regs + NFC_REG_ST) &
- NFC_RB_STATE(rb->info.nativeid));
break;
case RB_GPIO:
ret = gpio_get_value(rb->info.gpio);
--
2.1.4
\
 
 \ /
  Last update: 2016-03-07 18:01    [W:1.963 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site