Messages in this thread | | | Date | Tue, 8 Mar 2016 16:20:40 +0100 | From | Boris Brezillon <> | Subject | Re: [PATCH 02/16] mtd: nand: sunxi: fix clk rate calculation |
| |
On Tue, 8 Mar 2016 15:58:03 +0100 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote:
> Boris, > > On Mon, 7 Mar 2016 17:18:19 +0100, Boris Brezillon wrote: > > Unlike what is specified in the Allwinner datasheets, the NAND clock rate > > is not equal to 2/T but 1/T. Fix the clock rate selection accordingly. > > > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > > --- > > drivers/mtd/nand/sunxi_nand.c | 8 +------- > > 1 file changed, 1 insertion(+), 7 deletions(-) > > > > diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c > > index 4d01e65..ab66d8d 100644 > > --- a/drivers/mtd/nand/sunxi_nand.c > > +++ b/drivers/mtd/nand/sunxi_nand.c > > @@ -1208,13 +1208,7 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, > > /* Convert min_clk_period from picoseconds to nanoseconds */ > > min_clk_period = DIV_ROUND_UP(min_clk_period, 1000); > > > > - /* > > - * Convert min_clk_period into a clk frequency, then get the > > - * appropriate rate for the NAND controller IP given this formula > > - * (specified in the datasheet): > > - * nand clk_rate = 2 * min_clk_rate > > - */ > > When some HW works in a way that is *NOT* the one specified in the > datasheet, I think you should rather add *more* comments about this > aspect, rather than removing existing comments.
Fair enough (but you know how much I like documenting my code ;)). I'll add a comment explaining why it differs from the datasheet description :P.
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
| |