lkml.org 
[lkml]   [2015]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx
Date
Occasionally both MSI and INTx bits in the interrupt decode register are
set at once by the Xilinx AXI PCIe Bridge, so the MSI flag in the
interrupt message should be checked to ensure that the correct handler is
used.

If this check is not in place and the interrupt message type is MSI, the
INTx handler will be used erroneously when both type bits are set.
This will also be followed by a second read of the message FIFO, which can
result in the function returning early and the interrupt decode register
not being cleared if the FIFO is now empty.

Signed-off-by: Russell Joyce <russell.joyce@york.ac.uk>
---
drivers/pci/host/pcie-xilinx.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index f1a06a0..dcb9b57 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -449,14 +449,17 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
return IRQ_HANDLED;
}

- /* Clear interrupt FIFO register 1 */
- pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
- XILINX_PCIE_REG_RPIFR1);
-
- /* Handle INTx Interrupt */
- val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
- XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
- generic_handle_irq(irq_find_mapping(port->irq_domain, val));
+ if (!(val & XILINX_PCIE_RPIFR1_MSI_INTR)) {
+ /* Clear interrupt FIFO register 1 */
+ pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+ XILINX_PCIE_REG_RPIFR1);
+
+ /* Handle INTx Interrupt */
+ val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
+ XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
+ generic_handle_irq(irq_find_mapping(port->irq_domain,
+ val));
+ }
}

if (status & XILINX_PCIE_INTR_MSI) {
--
2.1.4


\
 
 \ /
  Last update: 2015-07-07 19:01    [W:0.071 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site