lkml.org 
[lkml]   [2015]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: xilinx: Add check for MSI interrupt flag before handling as INTx
On Tue, Jul 07, 2015 at 05:54:19PM +0100, Russell Joyce wrote:
> Occasionally both MSI and INTx bits in the interrupt decode register are
> set at once by the Xilinx AXI PCIe Bridge, so the MSI flag in the
> interrupt message should be checked to ensure that the correct handler is
> used.
>
> If this check is not in place and the interrupt message type is MSI, the
> INTx handler will be used erroneously when both type bits are set.
> This will also be followed by a second read of the message FIFO, which can
> result in the function returning early and the interrupt decode register
> not being cleared if the FIFO is now empty.
>
> Signed-off-by: Russell Joyce <russell.joyce@york.ac.uk>

Applied to pci/host-xilinx for v4.3, thanks.

Xilinx guys, speak up if there's any issue with this.

> ---
> drivers/pci/host/pcie-xilinx.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index f1a06a0..dcb9b57 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -449,14 +449,17 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> - /* Clear interrupt FIFO register 1 */
> - pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
> - XILINX_PCIE_REG_RPIFR1);
> -
> - /* Handle INTx Interrupt */
> - val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
> - XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
> - generic_handle_irq(irq_find_mapping(port->irq_domain, val));
> + if (!(val & XILINX_PCIE_RPIFR1_MSI_INTR)) {
> + /* Clear interrupt FIFO register 1 */
> + pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
> + XILINX_PCIE_REG_RPIFR1);
> +
> + /* Handle INTx Interrupt */
> + val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
> + XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
> + generic_handle_irq(irq_find_mapping(port->irq_domain,
> + val));
> + }
> }
>
> if (status & XILINX_PCIE_INTR_MSI) {
> --
> 2.1.4
>


\
 
 \ /
  Last update: 2015-07-21 18:01    [W:0.057 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site