lkml.org 
[lkml]   [2015]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver
This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6
boards to the Kontron PLD driver. The list of supported products in the
module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
---
drivers/mfd/Kconfig | 2 ++
drivers/mfd/kempld-core.c | 16 ++++++++++++++++
2 files changed, 18 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6538159..51809e2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -375,12 +375,14 @@ config MFD_KEMPLD
device may provide functions like watchdog, GPIO, UART and I2C bus.

The following modules are supported:
+ * COMe-bBL6
* COMe-bHL6
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
* COMe-cBL6
* COMe-cBT6
+ * COMe-cBW6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
* COMe-cHL6
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 8057849..463f4ea 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = {

static struct dmi_system_id kempld_dmi_table[] __initdata = {
{
+ .ident = "BBL6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "BHL6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
}, {
+ .ident = "CBW6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
.ident = "CCR2",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
--
1.8.5.1


\
 
 \ /
  Last update: 2015-07-14 13:41    [W:0.050 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site