Messages in this thread | | | Date | Mon, 20 Jul 2015 09:06:18 +0100 | From | Lee Jones <> | Subject | Re: [PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver |
| |
On Tue, 14 Jul 2015, Michael Brunner wrote:
> This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6 > boards to the Kontron PLD driver. The list of supported products in the > module description is also updated. > > Signed-off-by: Michael Brunner <michael.brunner@kontron.com> > Acked-by: Christian Rauch <christian.rauch@kontron.com> > --- > drivers/mfd/Kconfig | 2 ++ > drivers/mfd/kempld-core.c | 16 ++++++++++++++++ > 2 files changed, 18 insertions(+)
Applied, thanks.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 6538159..51809e2 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -375,12 +375,14 @@ config MFD_KEMPLD > device may provide functions like watchdog, GPIO, UART and I2C bus. > > The following modules are supported: > + * COMe-bBL6 > * COMe-bHL6 > * COMe-bIP# > * COMe-bPC2 (ETXexpress-PC) > * COMe-bSC# (ETXexpress-SC T#) > * COMe-cBL6 > * COMe-cBT6 > + * COMe-cBW6 > * COMe-cCT6 > * COMe-cDC2 (microETXexpress-DC) > * COMe-cHL6 > diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c > index 8057849..463f4ea 100644 > --- a/drivers/mfd/kempld-core.c > +++ b/drivers/mfd/kempld-core.c > @@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = { > > static struct dmi_system_id kempld_dmi_table[] __initdata = { > { > + .ident = "BBL6", > + .matches = { > + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), > + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"), > + }, > + .driver_data = (void *)&kempld_platform_data_generic, > + .callback = kempld_create_platform_device, > + }, { > .ident = "BHL6", > .matches = { > DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), > @@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { > .driver_data = (void *)&kempld_platform_data_generic, > .callback = kempld_create_platform_device, > }, { > + .ident = "CBW6", > + .matches = { > + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), > + DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"), > + }, > + .driver_data = (void *)&kempld_platform_data_generic, > + .callback = kempld_create_platform_device, > + }, { > .ident = "CCR2", > .matches = { > DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
| |