lkml.org 
[lkml]   [2015]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] Add NUMA support for NVDIMM devices
Date
Since NVDIMMs are installed on memory slots, they expose the NUMA
topology of a platform. This patchset adds support of sysfs
'numa_node' to the NVDIMM devices under /sys/bus/nd/devices.
With this change, numactl(8) accepts 'block:' and 'file:' paths of
pmem and btt devices as shown in the examples below.
numactl --preferred block:pmem0 --show
numactl --preferred file:/dev/pmem0s --show

Here is a result of fio benchmark to ext4/dax on pmem0 using numactl
on an HP DL380 with 2 sockets; pmem0 on node 0, and pmem1 on node 1.

Local [1] : 4098.3MB/s
Remote [2]: 3718.4MB/s

[1] numactl --preferred block:pmem0 --cpunodebind block:pmem0 fio <fs-on-pmem0>
[2] numactl --preferred block:pmem1 --cpunodebind block:pmem1 fio <fs-on-pmem0>

Patch 1/3-2/3 apply on top of the acpica branch of the pm tree.
Patch 3/3 applies on top of Dan Williams's v5 patch series of
"libnvdimm: non-volatile memory devices".

---
Toshi Kani (3):
1/3 acpi: Fix acpi_map_pxm_to_node() to handle numa_off
2/3 acpi: Add export to acpi_map_pxm_to_node()
3/3 libnvdimm: Add sysfs numa_node to NVDIMM devices

---
drivers/acpi/nfit.c | 2 ++
drivers/acpi/numa.c | 13 ++++++++++---
drivers/nvdimm/btt.c | 2 ++
drivers/nvdimm/bus.c | 12 ++++++++++++
drivers/nvdimm/nd.h | 1 +
drivers/nvdimm/region.c | 1 +
drivers/nvdimm/region_devs.c | 1 +
include/linux/acpi.h | 5 +++++
include/linux/libnvdimm.h | 1 +
9 files changed, 35 insertions(+), 3 deletions(-)


\
 
 \ /
  Last update: 2015-06-03 03:01    [W:0.056 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site