lkml.org 
[lkml]   [2015]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] libnvdimm: Add sysfs numa_node to NVDIMM devices
From
On Tue, Jun 2, 2015 at 5:26 PM, Toshi Kani <toshi.kani@hp.com> wrote:
> Since NVDIMMs are installed on memory slots, they expose the NUMA
> topology of a platform.
>
> This patch adds support of sysfs 'numa_node' to the NVDIMM devices
> under /sys/bus/nd/devices, such as regionN, namespaceN.0, and bttN.
> When bttN is not set up, its numa_node returns -1 (NUMA_NO_NODE).
> nmemN/numa_node always returns -1 for now since this device is for
> dimm-ioctl message interface and has little use of NUMA. It can be
> enhanced later to set a valid value if necessary.
>
> Here is an example of numa_node values on a 2-socket system with
> a single NVDIMM range on each socket.
> /sys/bus/nd/devices
> |-- btt0/numa_node:-1
> |-- btt1/numa_node:0
> |-- namespace0.0/numa_node:0
> |-- namespace1.0/numa_node:1
> |-- nmem0/numa_node:-1
> |-- nmem1/numa_node:-1
> |-- region0/numa_node:0
> |-- region1/numa_node:1
>
> With this change, numactl(8) accepts 'block:' and 'file:' paths of
> pmem and btt devices as shown in the examples below.
> numactl --preferred block:pmem0 --show
> numactl --preferred file:/dev/pmem0s --show
>
> Signed-off-by: Toshi Kani <toshi.kani@hp.com>
> ---
> drivers/acpi/nfit.c | 2 ++
> drivers/nvdimm/btt.c | 2 ++
> drivers/nvdimm/bus.c | 12 ++++++++++++
> drivers/nvdimm/nd.h | 1 +
> drivers/nvdimm/region.c | 1 +
> drivers/nvdimm/region_devs.c | 1 +
> include/linux/libnvdimm.h | 1 +
> 7 files changed, 20 insertions(+)
>
> diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
> index 5731e4a..a255f3a 100644
> --- a/drivers/acpi/nfit.c
> +++ b/drivers/acpi/nfit.c
> @@ -1255,6 +1255,8 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc,
> ndr_desc->res = &res;
> ndr_desc->provider_data = nfit_spa;
> ndr_desc->attr_groups = acpi_nfit_region_attribute_groups;
> + ndr_desc->numa_node = acpi_map_pxm_to_node(spa->proximity_domain);
> +
> list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) {
> struct acpi_nfit_memory_map *memdev = nfit_memdev->memdev;
> struct nd_mapping *nd_mapping;
> diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
> index 2d7ce9e..3b3e115 100644
> --- a/drivers/nvdimm/btt.c
> +++ b/drivers/nvdimm/btt.c
> @@ -1369,6 +1369,8 @@ static int nd_btt_probe(struct device *dev)
> rc = -ENOMEM;
> goto err_btt;
> }
> +
> + set_dev_node(dev, nd_region->numa_node);
> dev_set_drvdata(dev, btt);
>
> return 0;
> diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
> index d8a1794..5c34e68 100644
> --- a/drivers/nvdimm/bus.c
> +++ b/drivers/nvdimm/bus.c
> @@ -339,9 +339,21 @@ static ssize_t devtype_show(struct device *dev, struct device_attribute *attr,
> }
> static DEVICE_ATTR_RO(devtype);
>
> +#ifdef CONFIG_NUMA
> +static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%d\n", dev->numa_node);
> +}
> +DEVICE_ATTR_RO(numa_node);
> +#endif
> +
> static struct attribute *nd_device_attributes[] = {
> &dev_attr_modalias.attr,
> &dev_attr_devtype.attr,
> +#ifdef CONFIG_NUMA
> + &dev_attr_numa_node.attr,
> +#endif
> NULL,
> };

I'd prefer you define is_visible() in the nd_device_attribute_group
and gate showing this attribute on IS_ENABLED(CONFIG_NUMA) rather than
including these ifdef guards. The ifdef guards aren't necessary in
the CONFIG_NUMA=n case.


\
 
 \ /
  Last update: 2015-06-03 03:21    [W:0.194 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site