Messages in this thread Patch in this message | | | From | Ludovic Desroches <> | Subject | [PATCH 2/4] ARM: at91/dt: sama5d3 xplained: add mmc0 vqmmc entry | Date | Mon, 27 Apr 2015 15:19:11 +0200 |
| |
From: Ben Dooks <ben.dooks@codethink.co.uk>
The SAM5D3 Xplained device tree is missing the vqmmc node which is tied to 3.3V on the board. Add this to avoid the kernel warning that there is no vqmmc node.
atmel_mci f0000000.mmc: No vqmmc regulator found
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index af8b263..61922b3 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -35,6 +35,7 @@ apb { mmc0: mmc@f0000000 { pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + vqmmc-supply = <&vcc_3v3_reg>; status = "okay"; slot@0 { reg = <0>; -- 2.2.0
| |