lkml.org 
[lkml]   [2015]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 0/2] add support for pmic_arb v2 and correct framework
Date
pmic_arb v2 has no support for spmi non-data commands and thus
returns -EOPNOTSUPP on .cmd callback. This causes a failure in
spmi_drv_probe() which sends a wakeup command to the slave before
probing its driver. This patchset removes the wakeup from
spmi_drv_probe() since the spmi spec stipulates that a slaves
default state is active and doesn't need a wakeup.

Changes from v3 to v4:
* Remove the claim that this is a bug fix off the commit text
* Unmap the core register space as soon as we know that it will not be used
* Assign the core reg space to a local until we know if it appropriate to use
it to configure the controller fields (on v1) or unmap it (on v2).

Changes from v4 to v5:
* remove the unmap added in v4 since it is used again and the mapping is managed.
* correct printf formatting for 64bit compilers.
* correct base address for reading the channel table.

Gilad Avidov (2):
spmi: remove wakeup command before slave probe
spmi: pmic_arb: add support for hw version 2

.../bindings/spmi/qcom,spmi-pmic-arb.txt | 6 +-
drivers/spmi/spmi-pmic-arb.c | 319 +++++++++++++++++----
drivers/spmi/spmi.c | 9 +-
3 files changed, 267 insertions(+), 67 deletions(-)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation



\
 
 \ /
  Last update: 2015-03-25 18:41    [W:0.068 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site