lkml.org 
[lkml]   [2015]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectApplied "regulator: introduce min_dropout_uv" to the regulator tree
The patch

regulator: introduce min_dropout_uv

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From cfef37071f2bd32162f3b988742caab87192389c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 13 Oct 2015 12:45:26 +0200
Subject: [PATCH] regulator: introduce min_dropout_uv

Linear voltage Regulators need a input voltage that is higher than the
output voltage. Allow to specify a minimum dropout voltage which will
be used later to find the best input voltage for regulators.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
include/linux/regulator/driver.h | 2 ++
1 file changed, 2 insertions(+)

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 45932228cbf5..a3815bde342b 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -245,6 +245,7 @@ enum regulator_type {
* @linear_min_sel: Minimal selector for starting linear mapping
* @fixed_uV: Fixed voltage of rails.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @min_dropout_uv: The minimum dropout voltage this regulator can handle
* @linear_ranges: A constant table of possible voltage ranges.
* @n_linear_ranges: Number of entries in the @linear_ranges table.
* @volt_table: Voltage mapping table (if table based mapping)
@@ -292,6 +293,7 @@ struct regulator_desc {
unsigned int linear_min_sel;
int fixed_uV;
unsigned int ramp_delay;
+ int min_dropout_uv;

const struct regulator_linear_range *linear_ranges;
int n_linear_ranges;
--
2.6.1


\
 
 \ /
  Last update: 2015-10-16 19:01    [W:0.113 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site