lkml.org 
[lkml]   [2015]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] regulator: introduce min_dropout_uv
Date
Linear voltage Regulators need a input voltage that is higher than the
output voltage. Allow to specify a minimum dropout voltage which will
be used later to find the best input voltage for regulators.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/linux/regulator/driver.h | 2 ++
1 file changed, 2 insertions(+)

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4593222..a3815bd 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -245,6 +245,7 @@ enum regulator_type {
* @linear_min_sel: Minimal selector for starting linear mapping
* @fixed_uV: Fixed voltage of rails.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @min_dropout_uv: The minimum dropout voltage this regulator can handle
* @linear_ranges: A constant table of possible voltage ranges.
* @n_linear_ranges: Number of entries in the @linear_ranges table.
* @volt_table: Voltage mapping table (if table based mapping)
@@ -292,6 +293,7 @@ struct regulator_desc {
unsigned int linear_min_sel;
int fixed_uV;
unsigned int ramp_delay;
+ int min_dropout_uv;

const struct regulator_linear_range *linear_ranges;
int n_linear_ranges;
--
2.6.1


\
 
 \ /
  Last update: 2015-10-13 13:01    [W:0.246 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site