lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] x86/mce: Improve mcheck_init_device() error handling
On Sat, May 03, 2014 at 11:03:51PM +0200, Mathieu Souchaud wrote:
> Check return code of every function called by mcheck_init_device().
>
> Signed-off-by: Mathieu Souchaud <mattieu.souchaud@free.fr>
> ---
> arch/x86/kernel/cpu/mcheck/mce.c | 49 +++++++++++++++++++++++++++++++-------
> 1 file changed, 41 insertions(+), 8 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
> index 68317c8..284cfad 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce.c
> +++ b/arch/x86/kernel/cpu/mcheck/mce.c
> @@ -2437,32 +2437,65 @@ static __init int mcheck_init_device(void)
> int err;
> int i = 0;
>
> - if (!mce_available(&boot_cpu_data))
> - return -EIO;
> + if (!mce_available(&boot_cpu_data)) {
> + err = -EIO;
> + goto err_out;
> + }
>
> - zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
> + if (!zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL)) {
> + err = -ENOMEM;
> + goto err_out;
> + }
>
> mce_init_banks();
>
> err = subsys_system_register(&mce_subsys, NULL);
> if (err)
> - return err;
> + goto err_out_mem;
>
> cpu_notifier_register_begin();
> for_each_online_cpu(i) {
> err = mce_device_create(i);
> if (err) {
> - cpu_notifier_register_done();
> - return err;
> + goto err_device_create;
> }

No need for curly braces {} around a single if-statement.

> }
>
> register_syscore_ops(&mce_syscore_ops);

Ok, I see it now. Your patch is correct but the way the error labels
get placed it is hard to see that the cpu hotplug mutex is taken and
released in the right order, even on the error path.

So, can we try to simplify this and make it more obvious? I.e., we take
register_syscore_ops out of the way of the hotplug region:

---
cpu_notifier_register_begin();
for_each_online_cpu(i) {
err = mce_device_create(i);
if (err) {
cpu_notifier_register_done();
goto err_device_create;
}
}

__register_hotcpu_notifier(&mce_cpu_notifier);
cpu_notifier_register_done();
---

Also, as you've noticed we've dropped the __register_hotcpu_notifier
retval because that function returns 0 unconditionally. Which is very
smart, btw.</sarcasm>

This way, in the hotplug mutex region we have only cpu hotplug-relevant
operations which one can verify at a glance.

Then, we do

---
register_syscore_ops(&mce_syscore_ops);
---

Then, the error path looks simpler too:

---
err_register:
unregister_syscore_ops(&mce_syscore_ops);
cpu_notifier_register_begin();
__unregister_hotcpu_notifier(&mce_cpu_notifier);
cpu_notifier_register_done();

err_device_create:
/*
* mce_device_remove behave properly if mce_device_create was not
* called on that device.
*/
for_each_possible_cpu(i)
mce_device_remove(i);
---

We don't need to grab the hotplug lock when iterating over the possible
cpus because we don't care whether they're online or not, I'd say.

So what do you think, makes sense? You probably would need to apply the
patch and look at the code - it is easier at least to me.

Here's the whole diff with the new changes incorporated. If no one
complains, feel free to incorporate this into your v3 along with the
remaining feedback.

Thanks for your patience.

---
Index: b/arch/x86/kernel/cpu/mcheck/mce.c
===================================================================
--- a/arch/x86/kernel/cpu/mcheck/mce.c 2014-05-22 11:04:25.006626559 +0200
+++ b/arch/x86/kernel/cpu/mcheck/mce.c 2014-05-22 11:47:50.102583505 +0200
@@ -2437,32 +2437,63 @@ static __init int mcheck_init_device(voi
int err;
int i = 0;

- if (!mce_available(&boot_cpu_data))
- return -EIO;
+ if (!mce_available(&boot_cpu_data)) {
+ err = -EIO;
+ goto err_out;
+ }

- zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
+ if (!zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL)) {
+ err = -ENOMEM;
+ goto err_out;
+ }

mce_init_banks();

err = subsys_system_register(&mce_subsys, NULL);
if (err)
- return err;
+ goto err_out_mem;

cpu_notifier_register_begin();
for_each_online_cpu(i) {
err = mce_device_create(i);
if (err) {
cpu_notifier_register_done();
- return err;
+ goto err_device_create;
}
}

- register_syscore_ops(&mce_syscore_ops);
__register_hotcpu_notifier(&mce_cpu_notifier);
cpu_notifier_register_done();

+ register_syscore_ops(&mce_syscore_ops);
+
/* register character device /dev/mcelog */
- misc_register(&mce_chrdev_device);
+ err = misc_register(&mce_chrdev_device);
+ if (err)
+ goto err_register;
+
+ return 0;
+
+err_register:
+ unregister_syscore_ops(&mce_syscore_ops);
+
+ cpu_notifier_register_begin();
+ __unregister_hotcpu_notifier(&mce_cpu_notifier);
+ cpu_notifier_register_done();
+
+err_device_create:
+ /*
+ * mce_device_remove behave properly if mce_device_create was not
+ * called on that device.
+ */
+ for_each_possible_cpu(i)
+ mce_device_remove(i);
+
+err_out_mem:
+ free_cpumask_var(mce_device_initialized);
+
+err_out:
+ pr_err("Unable to init device /dev/mcelog (rc: %d)\n", err);

return err;
}
--
Regards/Gruss,
Boris.

Sent from a fat crate under my desk. Formatting is fine.
--


\
 
 \ /
  Last update: 2014-05-22 12:21    [W:0.055 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site