lkml.org 
[lkml]   [2014]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] acerhdf: Use bang-bang thermal governor
Date
From: Peter Feuerer <peter@piie.net>

acerhdf has been doing an on-off fan control using hysteresis by
post-manipulating the outcome of thermal subsystem trip point handling.
This patch enables acerhdf to use the bang-bang governor, which is
intended for on-off controlled fans.

CC: Zhang Rui <rui.zhang@intel.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Feuerer <peter@piie.net>
---
drivers/platform/x86/Kconfig | 2 +-
drivers/platform/x86/acerhdf.c | 45 ++++++++++++++++++++++++++++++++++--------
2 files changed, 38 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 27df2c5..bbc5dd2 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -38,7 +38,7 @@ config ACER_WMI

config ACERHDF
tristate "Acer Aspire One temperature and fan driver"
- depends on THERMAL && ACPI
+ depends on THERMAL && ACPI && THERMAL_GOV_BANG_BANG
---help---
This is a driver for Acer Aspire One netbooks. It allows to access
the temperature sensor and to control the fan.
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 8b6466b..acba516 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -50,7 +50,7 @@
*/
#undef START_IN_KERNEL_MODE

-#define DRV_VER "0.5.30"
+#define DRV_VER "0.5.31"

/*
* According to the Atom N270 datasheet,
@@ -130,8 +130,8 @@ struct bios_settings_t {
const char *vendor;
const char *product;
const char *version;
- unsigned char fanreg;
- unsigned char tempreg;
+ u8 fanreg;
+ u8 tempreg;
struct fancmd cmd;
struct manualcmd mcmd;
};
@@ -253,6 +253,14 @@ static const struct bios_settings_t bios_tbl[] = {

static const struct bios_settings_t *bios_cfg __read_mostly;

+/* used to force thermal to use bang_bang governor for acerhdf */
+static struct thermal_zone_params acerhdf_zone_params = {
+ .governor_name = "bang_bang",
+ .no_hwmon = 0,
+ .num_tbps = 0,
+ .tbp = 0,
+};
+
static int acerhdf_get_temp(int *temp)
{
u8 read_temp;
@@ -430,6 +438,17 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
{
if (trip == 0)
*type = THERMAL_TRIP_ACTIVE;
+ if (trip == 1)
+ *type = THERMAL_TRIP_CRITICAL;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon - fanoff;

return 0;
}
@@ -439,6 +458,8 @@ static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
{
if (trip == 0)
*temp = fanon;
+ else if (trip == 1)
+ *temp = ACERHDF_TEMP_CRIT;

return 0;
}
@@ -458,8 +479,10 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
.get_mode = acerhdf_get_mode,
.set_mode = acerhdf_set_mode,
.get_trip_type = acerhdf_get_trip_type,
+ .get_trip_hyst = acerhdf_get_trip_hyst,
.get_trip_temp = acerhdf_get_trip_temp,
.get_crit_temp = acerhdf_get_crit_temp,
+ .notify = NULL,
};


@@ -510,9 +533,7 @@ static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
}

if (state == 0) {
- /* turn fan off only if below fanoff temperature */
- if ((cur_state == ACERHDF_FAN_AUTO) &&
- (cur_temp < fanoff))
+ if (cur_state == ACERHDF_FAN_AUTO)
acerhdf_change_fanstate(ACERHDF_FAN_OFF);
} else {
if (cur_state == ACERHDF_FAN_OFF)
@@ -690,12 +711,20 @@ static int acerhdf_register_thermal(void)
if (IS_ERR(cl_dev))
return -EINVAL;

- thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
- &acerhdf_dev_ops, NULL, 0,
+ thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
+ &acerhdf_dev_ops,
+ &acerhdf_zone_params, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
return -EINVAL;

+ if (strcmp(thz_dev->governor->name,
+ acerhdf_zone_params.governor_name)) {
+ pr_err("Thermal governor %s is not compiled into thermal subsystem\n",
+ acerhdf_zone_params.governor_name);
+ return -EINVAL;
+ }
+
return 0;
}

--
1.9.2


\
 
 \ /
  Last update: 2014-04-28 01:21    [W:0.647 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site