lkml.org 
[lkml]   [2014]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 4/6] acerhdf: Use bang-bang thermal governor
Date
Zhang Rui writes:

> On Tue, 2014-07-22 at 17:37 +0200, Peter Feuerer wrote:
>> acerhdf has been doing an on-off fan control using hysteresis by
>> post-manipulating the outcome of thermal subsystem trip point handling.
>> This patch enables acerhdf to use the bang-bang governor, which is
>> intended for on-off controlled fans.
>>
>> Cc: Andrew Morton <akpm@linux-foundation.org>
>> CC: Zhang Rui <rui.zhang@intel.com>
>> Cc: Andreas Mohr <andi@lisas.de>
>> Cc: Javi Merino <javi.merino@arm.com>
>> Acked-and-tested-by: Borislav Petkov <bp@suse.de>
>> Signed-off-by: Peter Feuerer <peter@piie.net>
>
> Peter,
>
> will you take this patch, or do you want me to take this patch along
> with Patch 3/6?

Hi Rui,

please apply the whole series. I don't have a git repository where Linus
pulls from.

thanks and kind regards,
--peter;


>
> thanks,
> rui
>> ---
>> drivers/platform/x86/Kconfig | 3 ++-
>> drivers/platform/x86/acerhdf.c | 36 +++++++++++++++++++++++++++++++-----
>> 2 files changed, 33 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
>> index 172f26c..b5e80dc 100644
>> --- a/drivers/platform/x86/Kconfig
>> +++ b/drivers/platform/x86/Kconfig
>> @@ -38,7 +38,8 @@ config ACER_WMI
>>
>> config ACERHDF
>> tristate "Acer Aspire One temperature and fan driver"
>> - depends on THERMAL && ACPI
>> + select THERMAL_GOV_BANG_BANG
>> + depends on ACPI
>> ---help---
>> This is a driver for Acer Aspire One netbooks. It allows to access
>> the temperature sensor and to control the fan.
>> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
>> index f30767f..7fe7dbf 100644
>> --- a/drivers/platform/x86/acerhdf.c
>> +++ b/drivers/platform/x86/acerhdf.c
>> @@ -50,7 +50,7 @@
>> */
>> #undef START_IN_KERNEL_MODE
>>
>> -#define DRV_VER "0.5.30"
>> +#define DRV_VER "0.7.0"
>>
>> /*
>> * According to the Atom N270 datasheet,
>> @@ -258,6 +258,14 @@ static const struct bios_settings_t bios_tbl[] = {
>>
>> static const struct bios_settings_t *bios_cfg __read_mostly;
>>
>> +/*
>> + * this struct is used to instruct thermal layer to use bang_bang instead of
>> + * default governor for acerhdf
>> + */
>> +static struct thermal_zone_params acerhdf_zone_params = {
>> + .governor_name = "bang_bang",
>> +};
>> +
>> static int acerhdf_get_temp(int *temp)
>> {
>> u8 read_temp;
>> @@ -439,6 +447,17 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
>> return 0;
>> }
>>
>> +static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
>> + unsigned long *temp)
>> +{
>> + if (trip != 0)
>> + return -EINVAL;
>> +
>> + *temp = fanon - fanoff;
>> +
>> + return 0;
>> +}
>> +
>> static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
>> unsigned long *temp)
>> {
>> @@ -463,6 +482,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
>> .get_mode = acerhdf_get_mode,
>> .set_mode = acerhdf_set_mode,
>> .get_trip_type = acerhdf_get_trip_type,
>> + .get_trip_hyst = acerhdf_get_trip_hyst,
>> .get_trip_temp = acerhdf_get_trip_temp,
>> .get_crit_temp = acerhdf_get_crit_temp,
>> };
>> @@ -515,9 +535,7 @@ static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
>> }
>>
>> if (state == 0) {
>> - /* turn fan off only if below fanoff temperature */
>> - if ((cur_state == ACERHDF_FAN_AUTO) &&
>> - (cur_temp < fanoff))
>> + if (cur_state == ACERHDF_FAN_AUTO)
>> acerhdf_change_fanstate(ACERHDF_FAN_OFF);
>> } else {
>> if (cur_state == ACERHDF_FAN_OFF)
>> @@ -696,11 +714,19 @@ static int acerhdf_register_thermal(void)
>> return -EINVAL;
>>
>> thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
>> - &acerhdf_dev_ops, NULL, 0,
>> + &acerhdf_dev_ops,
>> + &acerhdf_zone_params, 0,
>> (kernelmode) ? interval*1000 : 0);
>> if (IS_ERR(thz_dev))
>> return -EINVAL;
>>
>> + if (strcmp(thz_dev->governor->name,
>> + acerhdf_zone_params.governor_name)) {
>> + pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",
>> + acerhdf_zone_params.governor_name);
>> + return -EINVAL;
>> + }
>> +
>> return 0;
>> }
>>
>
>


\
 
 \ /
  Last update: 2014-08-27 10:21    [W:0.134 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site