lkml.org 
[lkml]   [2014]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] crypto: qce: Adds sha and hmac transforms
Hi Stephen,

thanks for the comments.

On 04/09/2014 03:09 AM, Stephen Boyd wrote:
> On 04/03, Stanimir Varbanov wrote:
>> +static void qce_ahash_dma_done(void *data)
>> +{
>> + struct crypto_async_request *async_req = data;
>> + struct ahash_request *req = ahash_request_cast(async_req);
>> + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
>> + struct qce_sha_reqctx *rctx = ahash_request_ctx(req);
>> + struct qce_alg_template *tmpl = to_ahash_tmpl(async_req->tfm);
>> + struct qce_device *qce = tmpl->qce;
>> + struct qce_result_dump *result = qce->dma.result_buf;
>> + unsigned int digestsize = crypto_ahash_digestsize(ahash);
>> + int error;
>> + u32 status;
>> +
>> + qce_dma_terminate_all(&qce->dma);
>> +
>> + qce_unmapsg(qce->dev, req->src, rctx->src_nents, DMA_TO_DEVICE,
>> + rctx->src_chained);
>> + qce_unmapsg(qce->dev, &rctx->result_sg, 1, DMA_FROM_DEVICE, 0);
>> +
>> + memcpy(rctx->digest, result->auth_iv, digestsize);
>> + if (req->result)
>> + memcpy(req->result, result->auth_iv, digestsize);
>> +
>> + rctx->byte_count[0] = cpu_to_be32(result->auth_byte_count[0]);
>> + rctx->byte_count[1] = cpu_to_be32(result->auth_byte_count[1]);
>
> Does rctx->byte_count need to be marked __be32?

yes, makes sense.

>
>> +
>> + error = qce_check_status(qce, &status);
>> + if (error < 0)
>> + dev_err(qce->dev, "ahash operation error (%x)\n", status);
>> +
>> + req->src = rctx->src;
>> + req->nbytes = rctx->nbytes;
>> +
>> + rctx->last_blk = false;
>> + rctx->first_blk = false;
>> +
>> + tmpl->async_req_done(tmpl->qce, error);
>> +}
>> +
> [...]
>> +static int qce_import_common(struct ahash_request *req, u64 in_count,
>> + u32 *state, u8 *buffer, bool hmac)
>> +{
>> + struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
>> + struct qce_sha_reqctx *rctx = ahash_request_ctx(req);
>> + u64 count = in_count;
>> + unsigned int digestsize = crypto_ahash_digestsize(ahash);
>> + unsigned int blocksize;
>> +
>> + blocksize = crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash));
>> + rctx->count = in_count;
>> + memcpy(rctx->trailing_buf, buffer, blocksize);
>> +
>> + if (in_count <= blocksize) {
>> + rctx->first_blk = 1;
>> + } else {
>> + rctx->first_blk = 0;
>> + /*
>> + * For HMAC, there is a hardware padding done when first block
>> + * is set. Therefore the byte_count must be incremened by 64
>> + * after the first block operation.
>> + */
>> + if (hmac)
>> + count += SHA_PADDING;
>> + }
>> +
>> + rctx->byte_count[0] = (u32)(count & ~SHA_PADDING_MASK);
>> + rctx->byte_count[1] = (u32)(count >> 32);
>> + qce_cpu_to_be32p_array((__be32 *)rctx->digest, (const u8 *)state,
>> + digestsize);
>> + rctx->trailing_buf_len = (unsigned int)(in_count & (blocksize - 1));
>
> Is this a way to say
>
> (unsigned int)clamp_t(u64, in_count, blocksize - 1)
>
> ?

In fact no, I think it should be:

trailing_buf_len = in_count % blocksize.

>
>> +
>> + return 0;
>> +}
>> +
>> +static int qce_ahash_import(struct ahash_request *req, const void *in)
>> +{
>> + struct qce_sha_reqctx *rctx = ahash_request_ctx(req);
>> + u32 flags = rctx->flags;
>> + bool hmac = IS_SHA_HMAC(flags);
>> + int ret;
>> +
>> + if (IS_SHA1(flags) || IS_SHA1_HMAC(flags)) {
>> + struct sha1_state *state = (struct sha1_state *)in;
>
> Unnecessary cast from void *.

Nope, "in" is "const void *". Cast is needed to avoid compiler warnings.

>
>> +
>> + ret = qce_import_common(req, state->count, state->state,
>> + state->buffer, hmac);
>> + } else if (IS_SHA256(flags) || IS_SHA256_HMAC(flags)) {
>> + struct sha256_state *state = (struct sha256_state *)in;
>
> Ditto.
>
>> +
>> + ret = qce_import_common(req, state->count, state->state,
>> + state->buf, hmac);
>> + } else {
>> + ret = -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int qce_ahash_update(struct ahash_request *req)
>> +{
>> + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
>> + struct qce_sha_reqctx *rctx = ahash_request_ctx(req);
>> + struct qce_alg_template *tmpl = to_ahash_tmpl(req->base.tfm);
>> + unsigned int total, len;
>> + int nents;
>> + struct scatterlist *sg_last;
>> + u8 *buf;
>
>> + u32 pad_len;
>> + u32 trailing_buf_len;
>> + u32 nbytes;
>> + u32 offset;
>> + u32 bytes;
>
> size_t for these?

Hm, probably yes, I thought to revise this function cause it looks more
complicated than it should be.

>
>> + u8 *staging;
>> + bool chained;
>> + unsigned int blocksize;
>> +
>> + blocksize = crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm));
>> + rctx->count += req->nbytes;
>> +
>> + /* check for trailing buffer from previous updates and append it */
>> + total = req->nbytes + rctx->trailing_buf_len;
>> + len = req->nbytes;
> [...]
>> +
>> +struct qce_ahash_def {
>> + u32 flags;
>
> unsigned long?

sure, will do.

>
>> + const char *name;
>> + const char *drv_name;
>> + unsigned int digestsize;
>> + unsigned int blocksize;
>> + unsigned int statesize;
>> + const __be32 *std_iv;
>> +};
> [..]
>> +
>> +/*
>
> Nit: This isn't kernel doc notation

OK. Will change to kernel doc in next version.

>
>> + * @flags: operation flags
>> + * @src: request sg
>> + * @src_chained: is source scatterlist chained
>> + * @src_nents: source number of entries
>> + * @nbytes: request number of bytes
>> + * @byte_count: byte count
>> + * @count: save count in states during update, import and export
>> + * @first_blk: is it the first block
>> + * @last_blk: is it the last block
>> + * @trailing_buf: used during update, import and export
>> + * @trailing_buf_len: lenght of the trailing buffer
>> + * @staging_buf: buffer for internal use
>> + * @digest: calculated digest
>> + * @sg: used to chain sg lists
>> + * @authkey: pointer to auth key in sha ctx
>> + * @authklen: auth key length
>> + * @result_sg: scatterlist used for result buffer
>> + */
>> +struct qce_sha_reqctx {
>> + u32 flags;
>
> unsigned long?

sure, will do.

>
>> + struct scatterlist *src;
>> + bool src_chained;
>> + int src_nents;
>> + unsigned int nbytes;
>> + u32 byte_count[2];
>> + u64 count;
>> + bool first_blk;
>


--
regards,
Stan


\
 
 \ /
  Last update: 2014-04-10 17:01    [W:0.168 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site