lkml.org 
[lkml]   [2014]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.10 017/104] USB: ftdi_sio: added CS5 quirk for broken smartcard readers
Date
3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Leitner <colin.leitner@googlemail.com>

commit c1f15196ac3b541d084dc80a8fbd8a74c6a0bd44 upstream.

Genuine FTDI chips support only CS7/8. A previous fix in commit
8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE
setting") enforced this limitation and reported it back to userspace.

However, certain types of smartcard readers depend on specific
driver behaviour that requests 0 data bits (not 5) to change into a
different operating mode if CS5 has been set.

This patch reenables this behaviour for all FTDI devices.

Tagged to be added to stable, because it affects a lot of users of
embedded systems which rely on these readers to work properly.

Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de>
Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de>
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/serial/ftdi_sio.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2132,10 +2132,20 @@ static void ftdi_set_termios(struct tty_
}

/*
- * All FTDI UART chips are limited to CS7/8. We won't pretend to
+ * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
* support CS5/6 and revert the CSIZE setting instead.
+ *
+ * CS5 however is used to control some smartcard readers which abuse
+ * this limitation to switch modes. Original FTDI chips fall back to
+ * eight data bits.
+ *
+ * TODO: Implement a quirk to only allow this with mentioned
+ * readers. One I know of (Argolis Smartreader V1)
+ * returns "USB smartcard server" as iInterface string.
+ * The vendor didn't bother with a custom VID/PID of
+ * course.
*/
- if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+ if (C_CSIZE(tty) == CS6) {
dev_warn(ddev, "requested CSIZE setting not supported\n");

termios->c_cflag &= ~CSIZE;
@@ -2182,6 +2192,9 @@ no_skip:
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
switch (cflag & CSIZE) {
+ case CS5:
+ dev_dbg(ddev, "Setting CS5 quirk\n");
+ break;
case CS7:
urb_value |= 7;
dev_dbg(ddev, "Setting CS7\n");



\
 
 \ /
  Last update: 2014-02-05 05:41    [W:0.767 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site