lkml.org 
[lkml]   [2014]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] net: phy: add suspend_halted module param
Hi Sebastian,

2014-02-23 8:58 GMT-08:00 Sebastian Hesselbarth
<sebastian.hesselbarth@gmail.com>:
> commit 1211ce53077164e0d34641d0ca5fb4d4a7574498
> ("net: phy: resume/suspend PHYs on attach/detach")
> introduced a feature to suspend PHYs when entering halted state.
>
> Unfortunately, not all bootloaders properly power-up PHYs on reset
> and fail to access ethernet because the PHY is still powered down.
>
> Therefore, we add a boolean module parameter suspend_halted with
> default value of true. Disabling that parameter prevents PHYs from
> being suspended when entering halted state.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Reported-by: Andrew Lunn <andrew@lunn.ch>
> ---
> Andrew, can you please re-test if disabling the feature does work on
> your board? I tried a bunch of mine, but none failed to power-up the
> PHY in u-boot.

Would be good to get Andrew's testing on this just to make sure it
solves his problem. Otherwise:

Acked-by: Florian Fainelli <f.fainelli@gmail.com>

>
> Cc: David Miller <davem@davemloft.net>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: netdev@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/net/phy/phy_device.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 4b03e63639b7..671eea0eb5db 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -40,6 +40,10 @@ MODULE_DESCRIPTION("PHY library");
> MODULE_AUTHOR("Andy Fleming");
> MODULE_LICENSE("GPL");
>
> +static bool suspend_halted = true;
> +module_param(suspend_halted, bool, 0644);
> +MODULE_PARM_DESC(suspend_halted, "Suspend PHYs when entering halted state.");
> +
> void phy_device_free(struct phy_device *phydev)
> {
> put_device(&phydev->dev);
> @@ -685,6 +689,12 @@ int phy_suspend(struct phy_device *phydev)
> struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver);
> struct ethtool_wolinfo wol;
>
> + /* Some bootloaders do not power-up PHYs properly after reset,
> + * allow to disable the suspend halted PHYs feature.
> + */
> + if (!suspend_halted)
> + return -ENOSYS;
> +
> /* If the device has WOL enabled, we cannot suspend the PHY */
> wol.cmd = ETHTOOL_GWOL;
> phy_ethtool_get_wol(phydev, &wol);
> --
> 1.8.5.3
>



--
Florian


\
 
 \ /
  Last update: 2014-02-24 20:01    [W:0.478 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site