lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] extcon: gpio: add DT support
Date
Hi,

this series has been tested with v3.18-rc2 with a
yet-to-be-released board (called X15). That board
is DT-only and we use extcon-gpio to decide which
USB mode should be used (host or peripheral).

George Cherian (4):
extcon: gpio: Convert the driver to use gpio desc API's
extcon: gpio: Add dt support for the driver.
extcon: gpio: Always use gpio_get_value_cansleep
extcon: gpio: Add support for using cable names

.../devicetree/bindings/extcon/extcon-gpio.txt | 23 ++++++
drivers/extcon/extcon-gpio.c | 93 ++++++++++++++--------
2 files changed, 84 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt

--
2.1.0.GIT



\
 
 \ /
  Last update: 2014-11-03 17:41    [W:0.078 / U:1.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site