lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] ARM: sunxi: Add support for USB OTG PHY
Date
Hi,

There is already support for two USB phys, which are used for
USB host controllers on Allwinner SoC aka sunxi.

This patch series add support for the USB OTG phy (aka phy0).

The code has been tested on Allwinner A20 aka sun7i (Cubietruck).

Best regards,
Roman Byshko

Roman Byshko (5):
phy: sun4i: add support for USB phy0
ARM: dtsi: sunxi: add common VBUS regulator
ARM: sun7i: dtsi: add support for usbphy0
ARM: dts: sun7i: Cubietruck: override regulator pin
ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG
VBUS

arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 14 ++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++--
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 19 +++++++++++++++++++
drivers/phy/phy-sun4i-usb.c | 9 ++++++---
4 files changed, 41 insertions(+), 5 deletions(-)

--
2.1.2



\
 
 \ /
  Last update: 2014-10-27 23:21    [W:0.107 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site