lkml.org 
[lkml]   [2014]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] phy: sun4i: add support for USB phy0
Hi Roman,

Thanks for your patches

On Mon, Oct 27, 2014 at 10:43:01PM +0100, Roman Byshko wrote:
> The driver for sun4i USB phys currently supports
> only phy1 and phy2 which are used for USB host
> controllers. This patch adds support for USB phy0,
> which is used by the musb hdrc USB controller.

Like Andreas already pointed out, your signed-off-by is missing from
all your patches.

> ---
> drivers/phy/phy-sun4i-usb.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> index 0baf5ef..a24728b 100644
> --- a/drivers/phy/phy-sun4i-usb.c
> +++ b/drivers/phy/phy-sun4i-usb.c
> @@ -157,6 +157,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
> return ret;
> }
>
> + /* Regulation 45 ohms */
> + if (phy->index == 0)
> + sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);

What is this code supposed to do?

Some define for this bit and/or a better comment would be nice.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-10-28 23:01    [W:0.106 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site