lkml.org 
[lkml]   [2014]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.11 025/208] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN
Date
3.11.10.3 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@denx.de>

commit 10becdb402af4fd4808a0491a726b96128c41076 upstream.

We must clear this IMX6Q_GPR13_SATA_MPLL_CLK_EN bit on i.MX6Q, otherwise
Linux will fail to find the attached drive on some boards.

This entire fix was:
Reported-by: Eric Nelson <eric.nelson@boundarydevices.com>

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Linux-IDE <linux-ide@vger.kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/ata/ahci_imx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 58debb0..566cca4 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -60,7 +60,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
- * is 0x07fffffd, and the other one write for setting
+ * is 0x07ffffff, and the other one write for setting
* the mpll_clk_en.
*/
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -71,6 +71,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
| IMX6Q_GPR13_SATA_TX_LVL_MASK
+ | IMX6Q_GPR13_SATA_MPLL_CLK_EN
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
--
1.8.3.2


\
 
 \ /
  Last update: 2014-01-13 18:41    [W:0.716 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site