lkml.org 
[lkml]   [2013]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] hwmon: (lm90) Add power control
Date
The device lm90 can be controlled by the vdd rail.
Adding the power control support to power on/off the vdd rail.
And make sure that power is enabled before accessing the device.

Signed-off-by: Wei Ni <wni@nvidia.com>
---
drivers/hwmon/lm90.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index cdff742..306a348 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -89,6 +89,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/regulator/consumer.h>

/*
* Addresses to scan
@@ -302,6 +303,7 @@ static const struct lm90_params lm90_params[] = {
struct lm90_data {
struct device *hwmon_dev;
struct mutex update_lock;
+ struct regulator *lm90_reg;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
int kind;
@@ -1391,6 +1393,32 @@ static void lm90_init_client(struct i2c_client *client)
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
}

+static void lm90_power_control(struct i2c_client *client, bool is_enable)
+{
+ struct lm90_data *data = i2c_get_clientdata(client);
+ int ret;
+
+ if (!data->lm90_reg)
+ return;
+
+ mutex_lock(&data->update_lock);
+
+ if (is_enable)
+ ret = regulator_enable(data->lm90_reg);
+ else
+ ret = regulator_disable(data->lm90_reg);
+
+ if (ret < 0)
+ dev_err(&client->dev,
+ "Error in %s rail vdd, error %d\n",
+ (is_enable) ? "enabling" : "disabling", ret);
+ else
+ dev_info(&client->dev, "success in %s rail vdd\n",
+ (is_enable) ? "enabling" : "disabling");
+
+ mutex_unlock(&data->update_lock);
+}
+
static int lm90_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1406,6 +1434,20 @@ static int lm90_probe(struct i2c_client *client,
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);

+ data->lm90_reg = regulator_get(&client->dev, "vdd");
+ if (IS_ERR_OR_NULL(data->lm90_reg)) {
+ if (PTR_ERR(data->lm90_reg) == -ENODEV)
+ dev_info(&client->dev,
+ "No regulator found for vdd. Assuming vdd is always powered.");
+ else
+ dev_warn(&client->dev,
+ "Error [%ld] in getting the regulator handle for vdd.\n",
+ PTR_ERR(data->lm90_reg));
+ data->lm90_reg = NULL;
+ }
+
+ lm90_power_control(client, true);
+
/* Set the device type */
data->kind = id->driver_data;
if (data->kind == adm1032) {
@@ -1473,6 +1515,10 @@ exit_remove_files:
lm90_remove_files(client, data);
exit_restore:
lm90_restore_conf(client, data);
+ lm90_power_control(client, false);
+ if (data->lm90_reg)
+ regulator_put(data->lm90_reg);
+
return err;
}

@@ -1483,6 +1529,9 @@ static int lm90_remove(struct i2c_client *client)
hwmon_device_unregister(data->hwmon_dev);
lm90_remove_files(client, data);
lm90_restore_conf(client, data);
+ lm90_power_control(client, false);
+ if (data->lm90_reg)
+ regulator_put(data->lm90_reg);

return 0;
}
--
1.7.9.5


\
 
 \ /
  Last update: 2013-08-08 09:01    [W:0.186 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site