Messages in this thread | | | From | "Justin Piszcz" <> | Subject | 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard | Date | Wed, 3 Jul 2013 08:35:59 -0400 |
| |
Hello,
Currently running 3.10 with: CONFIG_SENSORS_NCT6775=y
Motherboard: Supermicro X9SRL-F
A couple questions: 1) Was curious if the PCH CHIP/CPU/MCH temperatures should be populated for this board? 2) Additionally, why is the CPUTIN in alarm?
I also found: http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X9SRA
Does Super Micro also have such a config file for the X9SRL-F? This board uses a NCT6776F.
Relevant output from lm_sensors 3.6.0+dfsg1-1:
nct6776-isa-0a30 Adapter: ISA adapter Vcore: +0.81 V (min = +0.54 V, max = +1.49 V) in1: +1.85 V (min = +1.62 V, max = +1.99 V) AVCC: +3.30 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.30 V (min = +2.98 V, max = +3.63 V) in4: +1.51 V (min = +1.35 V, max = +1.65 V) in5: +1.27 V (min = +1.13 V, max = +1.38 V) in6: +1.06 V (min = +0.92 V, max = +1.34 V) 3VSB: +3.57 V (min = +2.98 V, max = +3.63 V) Vbat: +3.49 V (min = +2.70 V, max = +3.63 V) fan1: 986 RPM (min = 700 RPM) fan2: 1322 RPM (min = 700 RPM) fan3: 1103 RPM (min = 700 RPM) fan4: 1080 RPM (min = 700 RPM) fan5: 1001 RPM (min = 700 RPM) SYSTIN: +42.0 C (high = +75.0 C, hyst = +70.0 C) sensor = thermistor CPUTIN: +33.0 C (high = +95.0 C, hyst = +92.0 C) ALARM sensor = thermistor AUXTIN: +23.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor PECI Agent 0: +0.0 C (high = +95.0 C, hyst = +92.0 C) (crit = +100.0 C) PCH_CHIP_TEMP: +0.0 C PCH_CPU_TEMP: +0.0 C PCH_MCH_TEMP: +0.0 C intrusion0: ALARM intrusion1: ALARM
sensors3.conf snippet:
chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
label in0 "Vcore" label in2 "AVCC" label in3 "+3.3V" label in7 "3VSB" label in8 "Vbat"
set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 3.3 * 0.90 set in3_max 3.3 * 1.10 set in7_min 3.3 * 0.90 set in7_max 3.3 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.3 * 1.10
Justin.
| |