lkml.org 
[lkml]   [2013]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net/sun3_82586: Kill array subscript above array bounds warning
Date
drivers/net/ethernet/i825xx/sun3_82586.c: In function 'sun3_82586_timeout':
drivers/net/ethernet/i825xx/sun3_82586.c:993:89: warning: array subscript is above array bounds [-Warray-bounds]

Using the default NUM_XMIT_BUFFS = 1, there's only one transmit buffer.
Hence accessing the second buffer is an out-of-bounds access.
Print the command status of the first NOP buffer instead.

Fortunately this actually worked fine, as the layout of transmit and NOP
buffers is sufficiently similar.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
- Untested due to lack of hardware
- Note that the driver never compiled with the non-default NUM_XMIT_BUFFS > 1

drivers/net/ethernet/i825xx/sun3_82586.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/i825xx/sun3_82586.c b/drivers/net/ethernet/i825xx/sun3_82586.c
index 353f57f6..d283d2e 100644
--- a/drivers/net/ethernet/i825xx/sun3_82586.c
+++ b/drivers/net/ethernet/i825xx/sun3_82586.c
@@ -990,7 +990,14 @@ static void sun3_82586_timeout(struct net_device *dev)
{
#ifdef DEBUG
printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev->name,p->scb->cus);
- printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status));
+ printk("%s: command-stats: %04x %04x\n", dev->name,
+ swab16(p->xmit_cmds[0]->cmd_status),
+#if (NUM_XMIT_BUFFS > 1)
+ swab16(p->xmit_cmds[1]->cmd_status)
+#else
+ swab16(p->nop_cmds[0]->cmd_status)
+#endif
+ );
printk("%s: check, whether you set the right interrupt number!\n",dev->name);
#endif
sun3_82586_close(dev);
--
1.7.9.5


\
 
 \ /
  Last update: 2013-07-17 15:01    [W:0.036 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site