lkml.org 
[lkml]   [2013]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 0/7] PCI: Change assign unassigned resources per root bus bassis
From
On Fri, May 31, 2013 at 11:03 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> BenH reported that there is some assign unassigned resource problem
> in powerpc.
>
> It turns out after
> | commit 0c5be0cb0edfe3b5c4b62eac68aa2aa15ec681af
> | Date: Thu Feb 23 19:23:29 2012 -0800
> |
> | PCI: Retry on IORESOURCE_IO type allocations
>
> even the root bus does not have io port range, it will keep retrying
> to realloc with mmio.
>
> After checking the code, found that we bound io port and mmio fail
> path together.
> First patch fix the problem, that will not make mmio fall back to must-only
> when only have io port fail with must+optional.
>
> During we found the fix for that problem, found that we can separate assign
> unassigned resources to per root bus.
> that will make the code simple, also could reuse it for hotadd path.
>
> These patches are targeted to 3.11
>
> -v4: split first patch into 4 patches per Bjorn.
> -v5: drop two patches that will pass root bus resource mask after we found
> simple and less intrusive way to fix the problem.
>
> PCI: Don't let mmio fallback to must-only, if ioport fails with must+optional
> PCI: Don't use temp bus for pci_bus_release_bridge_resources
> PCI: Use pci_walk_bus to detect unassigned resources
> PCI: Introduce enable_local to prepare per root bus handling
> PCI: Split pci_assign_unassigned_resources to per root bus
> PCI: Enable pci bridge when it is needed
> PCI: Retry assign unassigned resources for hotadd root bus

Hi, Bjorn,

Can you put this patchset in pci/next for 3.11?

Found another pciehp will need this one two. the pcie bridge does not
have io port range and it cause mmio get clear and retry.

Thanks

Yinghai


\
 
 \ /
  Last update: 2013-06-22 05:21    [W:0.116 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site