lkml.org 
[lkml]   [2013]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/7] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes
Hi Sebastian,

On Mon, May 06, 2013 at 05:33:39PM +0200, Sebastian Hesselbarth wrote:
> This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled
> Kirkwood boards. Phy nodes are also added with reg property set on a
> per-board basis.
...
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index fada7e6..c01a273 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -202,5 +202,57 @@
> clocks = <&gate_clk 4>;
> status = "disabled";
> };
> +
> + mdio: mdio-bus@72004 {
> + compatible = "marvell,orion-mdio";
> + reg = <0x72004 0x84>;
> + interrupts = <11>;

Shouldn't this be 46?

- Simon



\
 
 \ /
  Last update: 2013-05-21 00:01    [W:0.043 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site