lkml.org 
[lkml]   [2013]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5 v4] USB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD block
Date
This patch removes the various depends on USB_OHCI_HCD from the OHCI HCD
drivers and enclose them within an if USB_OHCI_HCD / endif block. The
Octeon OHCI HCD driver has been moved around to remain in this block.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Changes in v4:
- refreshed against latest usb-next

Changes in v3:
- added Alan's Acked-by tag

drivers/usb/host/Kconfig | 51 +++++++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 25 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index bc9123c..76f8bbc 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -358,16 +358,18 @@ config USB_OHCI_HCD
To compile this driver as a module, choose M here: the
module will be called ohci-hcd.

+if USB_OHCI_HCD
+
config USB_OHCI_HCD_OMAP1
bool "OHCI support for OMAP1/2 chips"
- depends on USB_OHCI_HCD && ARCH_OMAP1
+ depends on ARCH_OMAP1
default y
---help---
Enables support for the OHCI controller on OMAP1/2 chips.

config USB_OHCI_HCD_OMAP3
bool "OHCI support for OMAP3 and later chips"
- depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4)
+ depends on (ARCH_OMAP3 || ARCH_OMAP4)
default y
---help---
Enables support for the on-chip OHCI controller on
@@ -375,7 +377,7 @@ config USB_OHCI_HCD_OMAP3

config USB_OHCI_ATH79
bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
- depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X)
+ depends on (SOC_AR71XX || SOC_AR724X)
select USB_OHCI_HCD_PLATFORM
default y
help
@@ -387,7 +389,7 @@ config USB_OHCI_ATH79

config USB_OHCI_HCD_PPC_OF_BE
bool "OHCI support for OF platform bus (big endian)"
- depends on USB_OHCI_HCD && PPC_OF
+ depends on PPC_OF
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
---help---
@@ -396,7 +398,7 @@ config USB_OHCI_HCD_PPC_OF_BE

config USB_OHCI_HCD_PPC_OF_LE
bool "OHCI support for OF platform bus (little endian)"
- depends on USB_OHCI_HCD && PPC_OF
+ depends on PPC_OF
select USB_OHCI_LITTLE_ENDIAN
---help---
Enables support for little-endian USB controllers present on the
@@ -404,12 +406,12 @@ config USB_OHCI_HCD_PPC_OF_LE

config USB_OHCI_HCD_PPC_OF
bool
- depends on USB_OHCI_HCD && PPC_OF
+ depends on PPC_OF
default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE

config USB_OHCI_HCD_PCI
bool "OHCI support for PCI-bus USB controllers"
- depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
+ depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
default y
select USB_OHCI_LITTLE_ENDIAN
---help---
@@ -418,7 +420,7 @@ config USB_OHCI_HCD_PCI

config USB_OHCI_HCD_SSB
bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD)
+ depends on (SSB = y || SSB = USB_OHCI_HCD)
select USB_HCD_SSB
select USB_OHCI_HCD_PLATFORM
default n
@@ -436,7 +438,7 @@ config USB_OHCI_HCD_SSB

config USB_OHCI_SH
bool "OHCI support for SuperH USB controller (DEPRECATED)"
- depends on USB_OHCI_HCD && SUPERH
+ depends on SUPERH
select USB_OHCI_HCD_PLATFORM
---help---
This option is deprecated now and the driver was removed, use
@@ -447,13 +449,13 @@ config USB_OHCI_SH

config USB_OHCI_EXYNOS
boolean "OHCI support for Samsung EXYNOS SoC Series"
- depends on USB_OHCI_HCD && ARCH_EXYNOS
+ depends on ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.

config USB_CNS3XXX_OHCI
bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
- depends on USB_OHCI_HCD && ARCH_CNS3XXX
+ depends on ARCH_CNS3XXX
select USB_OHCI_HCD_PLATFORM
---help---
This option is deprecated now and the driver was removed, use
@@ -464,7 +466,6 @@ config USB_CNS3XXX_OHCI

config USB_OHCI_HCD_PLATFORM
bool "Generic OHCI driver for a platform device"
- depends on USB_OHCI_HCD
default n
---help---
Adds an OHCI host driver for a generic platform device, which
@@ -472,23 +473,33 @@ config USB_OHCI_HCD_PLATFORM

If unsure, say N.

+config USB_OCTEON_OHCI
+ bool "Octeon on-chip OHCI support"
+ depends on CPU_CAVIUM_OCTEON
+ default USB_OCTEON_EHCI
+ select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_OHCI_LITTLE_ENDIAN
+ help
+ Enable support for the Octeon II SOC's on-chip OHCI
+ controller. It is needed for low-speed USB 1.0 device
+ support. All CN6XXX based chips with USB are supported.
+

config USB_OHCI_BIG_ENDIAN_DESC
bool
- depends on USB_OHCI_HCD
default n

config USB_OHCI_BIG_ENDIAN_MMIO
bool
- depends on USB_OHCI_HCD
default n

config USB_OHCI_LITTLE_ENDIAN
bool
- depends on USB_OHCI_HCD
default n if STB03xxx || PPC_MPC52xx
default y

+endif # USB_OHCI_HCD
+
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
depends on PCI || SPARC_LEON || ARCH_VT8500
@@ -665,16 +676,6 @@ config USB_IMX21_HCD
module will be called "imx21-hcd".


-config USB_OCTEON_OHCI
- bool "Octeon on-chip OHCI support"
- depends on USB_OHCI_HCD && CPU_CAVIUM_OCTEON
- default USB_OCTEON_EHCI
- select USB_OHCI_BIG_ENDIAN_MMIO
- select USB_OHCI_LITTLE_ENDIAN
- help
- Enable support for the Octeon II SOC's on-chip OHCI
- controller. It is needed for low-speed USB 1.0 device
- support. All CN6XXX based chips with USB are supported.

config USB_OCTEON2_COMMON
bool
--
1.7.10.4


\
 
 \ /
  Last update: 2013-04-09 15:01    [W:0.119 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site