lkml.org 
[lkml]   [2013]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RESEND] regulator: palmas: Fix off-by-one for ramp_delay and register value mapping
From
Date
Datasheet says:
Time Step (TSTEP) selection, when changing the output voltage, the new value is
reached through successive voltage steps (if not bypassed). The equivalent
programmable slew rate of the output voltage is:

TSTEP[1:0]: 00 Jump (no slope control)
TSTEP[1:0]: 01 10mV/us
TSTEP[1:0]: 10 5mV/us (default)
TSTEP[1:0]: 11 2.5mV/us

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
This resend updates the commit log.

drivers/regulator/palmas-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 8fed60c..e3e8373 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -447,9 +447,9 @@ static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev,

if (ramp_delay <= 0)
reg = 0;
- else if (ramp_delay < 2500)
+ else if (ramp_delay <= 2500)
reg = 3;
- else if (ramp_delay < 5000)
+ else if (ramp_delay <= 5000)
reg = 2;
else
reg = 1;
--
1.7.10.4




\
 
 \ /
  Last update: 2013-04-22 13:21    [W:0.066 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site