Messages in this thread | | | Date | Fri, 13 Dec 2013 00:02:25 -0800 | Subject | Re: [PATCH v4 3/8] Documentation: dt: kona-sdhci: Add clocks property | From | Christian Daudt <> |
| |
On Thu, Dec 5, 2013 at 11:20 AM, Tim Kryger <tim.kryger@linaro.org> wrote: > The Kona SDHCI block requires a clock that must be specified in the > device tree. Update the documentation to reflect this requirement. > > Signed-off-by: Tim Kryger <tim.kryger@linaro.org> > Reviewed-by: Matt Porter <matt.porter@linaro.org> > --- > Documentation/devicetree/bindings/mmc/kona-sdhci.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt > index 789fb07..aaba248 100644 > --- a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt > +++ b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt > @@ -6,12 +6,16 @@ and the properties present in the bcm281xx SDHCI > Required properties: > - compatible : Should be "brcm,kona-sdhci" > - DEPRECATED: compatible : Should be "bcm,kona-sdhci" > +- clocks: phandle + clock specifier pair of the external clock > + > +Refer to clocks/clock-bindings.txt for generic clock consumer properties. > > Example: > > sdio2: sdio@0x3f1a0000 { > compatible = "brcm,kona-sdhci"; > reg = <0x3f1a0000 0x10000>; > + clocks = <&sdio3_clk>; > interrupts = <0x0 74 0x4>; > }; > > -- > 1.8.0.1 > Reviewed-by: Christian Daudt <bcm@fixthebug.org>
| |