lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/8] Update Kona drivers to use clocks
Date
This series declares the clocks present on bcm11351 (aka bcm281xx) SoCs
to be fixed at the rates configured by development bootloaders and then
updates the Kona drivers to make use of clock calls where appropriate.

Changes in v4:
- Rebased on v3.13-rc2
- DT binding documents now say "phandle + clock specifier pair"
- Recent change by Axel to use sdhci_pltfm_unregister must be undone
to allow clk_disable_unprepare to be called at the right point in
sdhci_bcm_kona_remove

Changes in v3:
- Updated the commit message for the UART DTS change
- Added a patch to change the kona timer binding doc
- Updated the commit message for the kona timer driver change
- Updated the panic message in the kona timer driver
- Added a patch to change the kona sdhci binding doc
- Moved the SDHCI driver change earlier in the series
- Removed unrelated change from SDHCI driver patch

Changes in v2:
- Renamed bsc4_clk to pmu_bsc_clk

Tim Kryger (8):
ARM: dts: Declare clocks as fixed on bcm11351
ARM: dts: Specify clocks for UARTs on bcm11351
Documentation: dt: kona-sdhci: Add clocks property
ARM: dts: Specify clocks for SDHCIs on bcm11351
mmc: sdhci-bcm-kona: Add basic use of clocks
Documentation: dt: kona-timer: Add clocks property
clocksource: kona: Add basic use of external clock
ARM: dts: Specify clocks for timer on bcm11351

.../devicetree/bindings/arm/bcm/kona-timer.txt | 7 +-
.../devicetree/bindings/mmc/kona-sdhci.txt | 4 +
arch/arm/boot/dts/bcm11351.dtsi | 111 ++++++++++++++++++++-
drivers/clocksource/bcm_kona_timer.c | 14 ++-
drivers/mmc/host/sdhci-bcm-kona.c | 37 ++++++-
5 files changed, 162 insertions(+), 11 deletions(-)

--
1.8.0.1



\
 
 \ /
  Last update: 2013-12-05 21:01    [W:0.296 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site