lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 7/8] clocksource: kona: Add basic use of external clock
Date
When an clock is specified in the device tree, enable it and use it to
determine the external clock frequency.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
---
drivers/clocksource/bcm_kona_timer.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 0d7d8c3..8a4ab36 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -17,6 +17,7 @@
#include <linux/jiffies.h>
#include <linux/clockchips.h>
#include <linux/types.h>
+#include <linux/clk.h>

#include <linux/io.h>
#include <asm/mach/time.h>
@@ -107,11 +108,18 @@ static const struct of_device_id bcm_timer_ids[] __initconst = {
static void __init kona_timers_init(struct device_node *node)
{
u32 freq;
+ struct clk *external_clk;

- if (!of_property_read_u32(node, "clock-frequency", &freq))
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
arch_timer_rate = freq;
- else
- panic("clock-frequency not set in the .dts file");
+ } else {
+ panic("unable to determine clock-frequency");
+ }

/* Setup IRQ numbers */
timers.tmr_irq = irq_of_parse_and_map(node, 0);
--
1.8.0.1


\
 
 \ /
  Last update: 2013-12-05 21:01    [W:0.199 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site