lkml.org 
[lkml]   [2013]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 5/6] ARM: davinci: da850: add GPIO DT node
Date
From: KV Sujith <sujithkv@ti.com>

Add DT node for Davinci GPIO driver.

Signed-off-by: KV Sujith <sujithkv@ti.com>
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 8d17346..b695548 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -8,6 +8,7 @@
* option) any later version.
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>

/ {
arm {
@@ -256,6 +257,19 @@
36
>;
};
+ gpio: gpio@1e26000 {
+ compatible = "ti,dm6441-gpio";
+ gpio-controller;
+ reg = <0x226000 0x1000>;
+ interrupts = <42 IRQ_TYPE_EDGE_BOTH
+ 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
+ 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
+ 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
+ 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+ ti,ngpio = <144>;
+ ti,davinci-gpio-unbanked = <0>;
+ status = "disabled";
+ };
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-21 19:41    [W:0.153 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site