Messages in this thread |  | | Date | Fri, 1 Nov 2013 21:54:10 +0100 | From | "Arend van Spriel" <> | Subject | Re: [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding |
| |
On 11/01/2013 08:45 PM, Matt Porter wrote: > Add a binding that describes the Broadcom Kona USB2 PHY found > on the BCM281xx family of SoCs. > > Signed-off-by: Matt Porter <matt.porter@linaro.org> > --- > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > new file mode 100644 > index 0000000..db309e2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > @@ -0,0 +1,15 @@ > +BROADCOM KONA USB2 PHY > + > +Required properties: > + - compatible: brcm,kona-usb2-phy > + - regs: offset and length of the PHY registers > + - #phy-cells: must be 0 > +Refer to phy/phy-bindings.txt for the generic PHY binding properties > + > +Example: > + > + usbphy: usbphy@3f130000 { > + compatible = "brcm,kona-usb2-phy"; > + reg = <0x3f130000 0x28>;
I expect 'regs' iso 'reg' in this example.
Regards, Arend
> + #phy-cells = <0>; > + }; >
|  |