lkml.org 
[lkml]   [2013]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding
On Fri, Nov 01, 2013 at 09:54:10PM +0100, Arend van Spriel wrote:
> On 11/01/2013 08:45 PM, Matt Porter wrote:
> >Add a binding that describes the Broadcom Kona USB2 PHY found
> >on the BCM281xx family of SoCs.
> >
> >Signed-off-by: Matt Porter <matt.porter@linaro.org>
> >---
> > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
> >
> >diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
> >new file mode 100644
> >index 0000000..db309e2
> >--- /dev/null
> >+++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
> >@@ -0,0 +1,15 @@
> >+BROADCOM KONA USB2 PHY
> >+
> >+Required properties:
> >+ - compatible: brcm,kona-usb2-phy
> >+ - regs: offset and length of the PHY registers
> >+ - #phy-cells: must be 0
> >+Refer to phy/phy-bindings.txt for the generic PHY binding properties
> >+
> >+Example:
> >+
> >+ usbphy: usbphy@3f130000 {
> >+ compatible = "brcm,kona-usb2-phy";
> >+ reg = <0x3f130000 0x28>;
>
> I expect 'regs' iso 'reg' in this example.

Yes, will fix the typo in that property for v3.

Thanks,
Matt

> >+ #phy-cells = <0>;
> >+ };
> >
>
>


\
 
 \ /
  Last update: 2013-11-02 00:21    [W:0.122 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site