lkml.org 
[lkml]   [2013]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Allow Marvell SATA driver to work with LEDS_TRIGGER_IDE_DISK
Date
Add a call to the IDE LED Trigger within the Marvell SATA driver to allow
Marvell SoC devices to show SATA activity via GPIO connected LEDs.

Signed-off-by: Joshua Coombs <josh.coombs@gmail.com>
---
drivers/ata/sata_mv.c | 3 +++
drivers/leds/Kconfig | 3 +--
2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 68f4fb5..4aaf6f0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -71,6 +71,7 @@
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/libata.h>
+#include <linux/leds.h>

#define DRV_NAME "sata_mv"
#define DRV_VERSION "1.28"
@@ -1156,6 +1157,8 @@ static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio,
{
int want_ncq = (protocol == ATA_PROT_NCQ);

+ ledtrig_ide_activity();
+
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
if (want_ncq != using_ncq)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b58bc8a..d2071d0 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -496,10 +496,9 @@ config LEDS_TRIGGER_ONESHOT

config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends on IDE_GD_ATA
depends on LEDS_TRIGGERS
help
- This allows LEDs to be controlled by IDE disk activity.
+ This allows LEDs to be controlled by IDE or SATA disk activity.
If unsure, say Y.

config LEDS_TRIGGER_HEARTBEAT
--
1.8.0.2


\
 
 \ /
  Last update: 2013-01-08 20:21    [W:0.068 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site