lkml.org 
[lkml]   [2013]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v5 0/8] introduce PCI bus notifier chain to get rid of the ACPI PCI subdriver interfaces
On Fri, Jan 18, 2013 at 9:07 AM, Jiang Liu <liuj97@gmail.com> wrote:
> This is an RFC patchset to address review comments in thread at:
> https://patchwork.kernel.org/patch/1946851/. The patch just pasts
> compilation. If no objection to the new implementation, I will
> go on to modify acpiphp driver and conduct tests.
>
> The main changes from V4 to V5 includes:
> 1) introduce a dedicated notifier chain for PCI buses
> 2) change pci_slot as built-in driver
> 3) unify the way to create/destroy PCI slots
> 4) introduce a kernel option to disable PCIe native hotplug
>
> TODO:
> 1) change acpiphp as built-in and unify the way to create/destroy ACPI
> based hotplug slots.
> 2) change other ACPI PCI subdriver in Yinghai's root bridge hotplug series
> to use the PCI bus notifier chain.
> 3) Remove the ACPI PCI subdriver interface eventaully.
>
> Jiang Liu (8):
> PCI: make PCI device create/destroy logic symmetric
> PCI: split registration of PCI bus devices into two stages
> PCI: add a blocking notifier chain for PCI bus addition/removal
> ACPI, PCI: avoid building pci_slot as module
> PCI, ACPI: hook PCI bus notifications to create/destroy PCI slots
> pci_slot: replace printk(KERN_xxx) with pr_xxx()
> PCI/PCIe: add "pci=nopciehp" to disable PCIe native hotplug
> PCI/PCIe: only claim PME from firmware when CONFIG_PCIE_PME is
> enabled
>
> Documentation/kernel-parameters.txt | 2 +
> drivers/acpi/Kconfig | 5 +-
> drivers/acpi/internal.h | 5 +
> drivers/acpi/pci_root.c | 8 +-
> drivers/acpi/pci_slot.c | 217 ++++++++++-------------------------
> drivers/acpi/scan.c | 1 +
> drivers/pci/bus.c | 26 ++++-
> drivers/pci/pci.c | 2 +
> drivers/pci/pci.h | 1 +
> drivers/pci/pcie/portdrv_core.c | 7 +-
> drivers/pci/pcie/portdrv_pci.c | 3 +
> drivers/pci/probe.c | 7 +-
> drivers/pci/remove.c | 15 +--
> include/linux/pci.h | 21 ++++
> 14 files changed, 142 insertions(+), 178 deletions(-)

I think the problem we're trying to solve is that we don't initialize
hot-added devices, correctly, e.g., we don't set up AER, we don't
update acpi/pci_slot stuff, we probably don't set up PME etc. We also
have similar issues like IOMMU init on powerpc.

Notifier chains seem like an unnecessarily complicated way to deal
with this. They're great for communicating between modules that stay
at arm's length from each other. But that's not the case here --
everything is PCI and is quite closely coupled. I think AER, PME,
slot, etc., should be initialized directly in pci_device_add() or
somewhere nearby.

This might sound a bit radical because it implies some fairly
far-reaching changes. It means this code can't be a module (the only
one that can be built as a module today is pciehp, and I think
everybody agrees that we should make it static as soon as we can
figure out the acpiphp/pciehp issue). I think it also means the
pcieportdrv concept is of dubious value, since all the services should
be known at build-time and we probably don't need a registration
interface for them.

Bjorn


\
 
 \ /
  Last update: 2013-01-28 22:41    [W:0.301 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site