lkml.org 
[lkml]   [2013]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC PATCH v5 0/8] introduce PCI bus notifier chain to get rid of the ACPI PCI subdriver interfaces
On 01/29/2013 10:04 AM, Jiang Liu wrote:
> On 2013-1-29 8:34, Rafael J. Wysocki wrote:
>> On Monday, January 28, 2013 01:56:33 PM Bjorn Helgaas wrote:
>>> On Fri, Jan 18, 2013 at 9:07 AM, Jiang Liu <liuj97@gmail.com> wrote:
>>>> This is an RFC patchset to address review comments in thread at:
>>>> https://patchwork.kernel.org/patch/1946851/. The patch just pasts
>>>> compilation. If no objection to the new implementation, I will
>>>> go on to modify acpiphp driver and conduct tests.
>>>>
>>>> The main changes from V4 to V5 includes:
>>>> 1) introduce a dedicated notifier chain for PCI buses
>>>> 2) change pci_slot as built-in driver
>>>> 3) unify the way to create/destroy PCI slots
>>>> 4) introduce a kernel option to disable PCIe native hotplug
>>>>
>>>> TODO:
>>>> 1) change acpiphp as built-in and unify the way to create/destroy ACPI
>>>> based hotplug slots.
>>>> 2) change other ACPI PCI subdriver in Yinghai's root bridge hotplug series
>>>> to use the PCI bus notifier chain.
>>>> 3) Remove the ACPI PCI subdriver interface eventaully.
>>>>
>>>> Jiang Liu (8):
>>>> PCI: make PCI device create/destroy logic symmetric
>>>> PCI: split registration of PCI bus devices into two stages
>>>> PCI: add a blocking notifier chain for PCI bus addition/removal
>>>> ACPI, PCI: avoid building pci_slot as module
>>>> PCI, ACPI: hook PCI bus notifications to create/destroy PCI slots
>>>> pci_slot: replace printk(KERN_xxx) with pr_xxx()
>>>> PCI/PCIe: add "pci=nopciehp" to disable PCIe native hotplug
>>>> PCI/PCIe: only claim PME from firmware when CONFIG_PCIE_PME is
>>>> enabled
>>>>
>>>> Documentation/kernel-parameters.txt | 2 +
>>>> drivers/acpi/Kconfig | 5 +-
>>>> drivers/acpi/internal.h | 5 +
>>>> drivers/acpi/pci_root.c | 8 +-
>>>> drivers/acpi/pci_slot.c | 217 ++++++++++-------------------------
>>>> drivers/acpi/scan.c | 1 +
>>>> drivers/pci/bus.c | 26 ++++-
>>>> drivers/pci/pci.c | 2 +
>>>> drivers/pci/pci.h | 1 +
>>>> drivers/pci/pcie/portdrv_core.c | 7 +-
>>>> drivers/pci/pcie/portdrv_pci.c | 3 +
>>>> drivers/pci/probe.c | 7 +-
>>>> drivers/pci/remove.c | 15 +--
>>>> include/linux/pci.h | 21 ++++
>>>> 14 files changed, 142 insertions(+), 178 deletions(-)
>>>
>>> I think the problem we're trying to solve is that we don't initialize
>>> hot-added devices, correctly, e.g., we don't set up AER, we don't
>>> update acpi/pci_slot stuff, we probably don't set up PME etc. We also
>>> have similar issues like IOMMU init on powerpc.
>>>
>>> Notifier chains seem like an unnecessarily complicated way to deal
>>> with this. They're great for communicating between modules that stay
>>> at arm's length from each other. But that's not the case here --
>>> everything is PCI and is quite closely coupled. I think AER, PME,
>>> slot, etc., should be initialized directly in pci_device_add() or
>>> somewhere nearby.
>>
>> I agree.
>>
>>> This might sound a bit radical because it implies some fairly
>>> far-reaching changes. It means this code can't be a module (the only
>>> one that can be built as a module today is pciehp, and I think
>>> everybody agrees that we should make it static as soon as we can
>>> figure out the acpiphp/pciehp issue). I think it also means the
>>> pcieportdrv concept is of dubious value, since all the services should
>>> be known at build-time and we probably don't need a registration
>>> interface for them.
>>
>> It is of dubious value regardless. It just adds complexity for no gain.
>> Moreover, these things are in fact not mutually independent.
>>
>> I've had a lot of headaches trying to work around that when I was working
>> on PME support and later on _OSC for root bridges. Let's just take that
>> stuff away once and for good. :-)
> Hi Bjorn and Rafael,
> Thanks for advice. We will go this direction to change those modules
> as built-in.
> Regards!
> Gerry
>
Hi Bjorn,
I have done some investigation about how to implement this without
using notifier chain. Due to commit "PCI: Put pci_dev in device tree as early
as possible", a PCI device will be registered to the driver core before creating
the subordinate PCI bus. So we can't reply on the ACPI PCI device glue code
to create/destroy PCI slots or acpiphp hotplug slots. So my current plan is
to introduce two weak functions as below, is it acceptable?

Regards!
Gerry

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b494066..a5c22e7 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -673,6 +673,8 @@ add_dev:
ret = device_register(&child->dev);
WARN_ON(ret < 0);

+ pcibios_add_bus(child);
+
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(child);

@@ -1661,6 +1663,14 @@ int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *
return 0;
}

+void __weak pcibios_add_bus(struct pci_bus *bus)
+{
+}
+
+void __weak pcibios_remove_bus(struct pci_bus *bus)
+{
+}
+
struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata, struct list_head *resources)
{
@@ -1715,6 +1725,8 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int b
if (error)
goto class_dev_reg_err;

+ pcibios_remove_bus(b);
+
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(b);

diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index fc38c48..3dbdf82 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -52,6 +52,7 @@ void pci_remove_bus(struct pci_bus *bus)
return;

pci_remove_legacy_files(bus);
+ pcibios_remove_bus(child);
device_unregister(&bus->dev);
}
EXPORT_SYMBOL(pci_remove_bus);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 056d3d6..fd8ba0c 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -380,6 +380,8 @@ void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
void *release_data);

int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge);
+void pcibios_add_bus(struct pci_bus *bus);
+void pcibios_remove_bus(struct pci_bus *bus);

/*
* The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond

>>
>> Thanks,
>> Rafael
>>
>>
>
>



\
 
 \ /
  Last update: 2013-02-01 18:01    [W:0.122 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site