lkml.org 
[lkml]   [2012]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 26/26] mmc: sdhci-pci: add panic write support
Date
From: Adrian Hunter <adrian.hunter@intel.com>

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 4bb74b0..bee9a45 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -966,6 +966,8 @@ static void sdhci_pci_hw_reset(struct sdhci_host *host)

if (!gpio_is_valid(rst_n_gpio))
return;
+ if (mmc_panic_task_active(host->mmc))
+ return;
gpio_set_value_cansleep(rst_n_gpio, 0);
/* For eMMC, minimum is 1us but give it 10us for good measure */
udelay(10);
@@ -1278,6 +1280,9 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
}

host->mmc->pm_caps = MMC_PM_KEEP_POWER | MMC_PM_WAKE_SDIO_IRQ;
+#ifdef CONFIG_MMC_BLOCK_PANIC_WRITE
+ slot->host->mmc->caps2 = MMC_CAP_PANIC_WRITE;
+#endif

ret = sdhci_add_host(host);
if (ret)
--
1.7.9.5


\
 
 \ /
  Last update: 2012-10-23 16:21    [W:0.212 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site