lkml.org 
[lkml]   [2012]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH REGRESSION FIX] dw_dmac: make driver's endianness configurable
From: Hein Tibosch <hein_tibosch@yahoo.es>

The dw_dmac was originally developed for avr32 to be used with the Synopsys
DesignWare AHB DMA controller. Starting from 2.6.38, access to the device's i/o
memory was done with the little-endian readl/writel functions(1)

This broke the driver for the avr32 platform, because it needs big (native)
endian accessors.
This patch makes the endianness configurable using 'DW_DMAC_BIG_ENDIAN_IO',
which will default be true for AVR32

I submitted this patch before(2) but then waited for Andy to finish other
changes to the same module(3).

(1) https://patchwork.kernel.org/patch/608211
(2) https://lkml.org/lkml/2012/8/26/148
(3) https://lkml.org/lkml/2012/9/21/173

Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es>

---
drivers/dma/Kconfig | 11 +++++++++++
drivers/dma/dw_dmac_regs.h | 18 +++++++++++++-----
2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 677cd6e..d4c1218 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -90,6 +90,17 @@ config DW_DMAC
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.

+config DW_DMAC_BIG_ENDIAN_IO
+ bool "Use big endian I/O register access"
+ default y if AVR32
+ depends on DW_DMAC
+ help
+ Say yes here to use big endian I/O access when reading and writing
+ to the DMA controller registers. This is needed on some platforms,
+ like the Atmel AVR32 architecture.
+
+ If unsure, use the default setting.
+
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index ff39fa6..8896559 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -98,9 +98,17 @@ struct dw_dma_regs {
u32 DW_PARAMS;
};

+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
+#define dma_readl_native ioread32be
+#define dma_writel_native iowrite32be
+#else
+#define dma_readl_native readl
+#define dma_writel_native writel
+#endif
+
/* To access the registers in early stage of probe */
#define dma_read_byaddr(addr, name) \
- readl((addr) + offsetof(struct dw_dma_regs, name))
+ dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))

/* Bitfields in DW_PARAMS */
#define DW_PARAMS_NR_CHAN 8 /* number of channels */
@@ -216,9 +224,9 @@ __dwc_regs(struct dw_dma_chan *dwc)
}

#define channel_readl(dwc, name) \
- readl(&(__dwc_regs(dwc)->name))
+ dma_readl_native(&(__dwc_regs(dwc)->name))
#define channel_writel(dwc, name, val) \
- writel((val), &(__dwc_regs(dwc)->name))
+ dma_writel_native((val), &(__dwc_regs(dwc)->name))

static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
{
@@ -246,9 +254,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
}

#define dma_readl(dw, name) \
- readl(&(__dw_regs(dw)->name))
+ dma_readl_native(&(__dw_regs(dw)->name))
#define dma_writel(dw, name, val) \
- writel((val), &(__dw_regs(dw)->name))
+ dma_writel_native((val), &(__dw_regs(dw)->name))

#define channel_set_bit(dw, reg, mask) \
dma_writel(dw, reg, ((mask) << 8) | (mask))
--
1.7.8.0




\
 
 \ /
  Last update: 2012-10-14 18:01    [W:0.083 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site