lkml.org 
[lkml]   [2012]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] genirq: for edge interrupt IRQS_ONESHOT support with irq thread
From
Date

In our system, there is one edge interrupt, and we want it to be
irq thread with IRQS_ONESHOT, and found in handle_edge_irq(),
even with IRQS_ONESHOT, the irq is still unmasked without care of
flag IRQS_ONESHOT.

It causes IRQS_ONESHOT can not work well for edge interrupt, but also
after the irq thread finished with flag IRQS_ONESHOT, the irq will be
possible to be unmasked again, it should be messing mask/unmask logic.

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
---
kernel/irq/chip.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 57d86d0..f23f524 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -497,7 +497,13 @@ handle_edge_irq(unsigned int irq, struct irq_desc *desc)
kstat_incr_irqs_this_cpu(irq, desc);

/* Start handling the irq */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
+ if (desc->istate & IRQS_ONESHOT) {
+ mask_ack_irq(desc);
+ handle_irq_event(desc);
+ cond_unmask_irq(desc);
+ goto out_unlock;
+ } else
+ desc->irq_data.chip->irq_ack(&desc->irq_data);

do {
if (unlikely(!desc->action)) {
--
1.7.0.4




\
 
 \ /
  Last update: 2012-10-12 06:21    [W:1.338 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site