lkml.org 
[lkml]   [2012]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] genirq: for edge interrupt IRQS_ONESHOT support with irq thread
On Fri, 12 Oct 2012, Chuansheng Liu wrote:
>
> In our system, there is one edge interrupt, and we want it to be
> irq thread with IRQS_ONESHOT, and found in handle_edge_irq(),
> even with IRQS_ONESHOT, the irq is still unmasked without care of
> flag IRQS_ONESHOT.
>
> It causes IRQS_ONESHOT can not work well for edge interrupt, but also
> after the irq thread finished with flag IRQS_ONESHOT, the irq will be
> possible to be unmasked again, it should be messing mask/unmask logic.

This is just wrong. By masking edge interrupts you will run into
situations where you will lose interrupts.

Can you please explain, why you want to mask your edge interrupt?

Thanks,

tglx


> Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
> ---
> kernel/irq/chip.c | 8 +++++++-
> 1 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
> index 57d86d0..f23f524 100644
> --- a/kernel/irq/chip.c
> +++ b/kernel/irq/chip.c
> @@ -497,7 +497,13 @@ handle_edge_irq(unsigned int irq, struct irq_desc *desc)
> kstat_incr_irqs_this_cpu(irq, desc);
>
> /* Start handling the irq */
> - desc->irq_data.chip->irq_ack(&desc->irq_data);
> + if (desc->istate & IRQS_ONESHOT) {
> + mask_ack_irq(desc);
> + handle_irq_event(desc);
> + cond_unmask_irq(desc);
> + goto out_unlock;
> + } else
> + desc->irq_data.chip->irq_ack(&desc->irq_data);
>
> do {
> if (unlikely(!desc->action)) {
> --
> 1.7.0.4
>
>
>
>


\
 
 \ /
  Last update: 2012-10-12 15:21    [W:0.074 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site