lkml.org 
[lkml]   [2003]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectkernel 2.6.0 compilation help
Date
Dear all

i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
compiled ok but does not boot
give following error at boot all drive are detected before boot.

module-init-tools 0.9.9 installed
ext3 filesystem support was build in the kernel
aslo /dev file system support buildin
my root parttion is /dev/sda1 ( ext3)
my .config

http://mail.magic.net.pk/kernel/.config


Error Message ##

VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root="boot option
Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)

i have following Hardware

Intel Entry level Server motherboard
Pentitum III 1266 MHz processor
2 GB RAM
3 SCSI hard drive
no ide drive

i have tried many time with different option but with no luck

Thanks waiting for your reply

Talha

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.070 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site