lkml.org 
[lkml]   [2003]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: kernel 2.6.0 compilation help

Dear Muhammad,

I think that you need to set this option

CONFIG_BLK_DEV_SD=m to Y and your problem should be solved. The kernel now doesn't know scsi disks (in menuconfig SCSI disk support)

Best regards,

Stef


Muhammad Talha wrote:

>Dear all
>
>i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
>compiled ok but does not boot
>give following error at boot all drive are detected before boot.
>
>module-init-tools 0.9.9 installed
>ext3 filesystem support was build in the kernel
>aslo /dev file system support buildin
>my root parttion is /dev/sda1 ( ext3)
>my .config
>
>http://mail.magic.net.pk/kernel/.config
>
>
>Error Message ##
>
>VFS: Cannot open root device "sda1" or unknown-block(0,0)
>Please append a correct "root="boot option
>Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)
>
>i have following Hardware
>
>Intel Entry level Server motherboard
>Pentitum III 1266 MHz processor
>2 GB RAM
>3 SCSI hard drive
>no ide drive
>
>i have tried many time with different option but with no luck
>
>Thanks waiting for your reply
>
>Talha
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.184 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site