Messages in this thread | | | Date | Sat, 10 Aug 2002 15:29:56 -0400 | From | Blaise <> | Subject | actiontec PCI call waiting modem not responding with kernels 2.4.7+, 2.4.6 is ok though.. |
| |
here we go..
1 Problem : Not able to init modem..
2 Desc : Worked fine till 2.4.7..
3 Keywords : PCI Modem
4 Kernel version
Working : Linux version 2.4.6 (root@core) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Jan 16 14:46:28 EST 2002 Not working: Linux version 2.4.7 (root@core) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Jan 16 14:46:28 EST 2002
5 Oops : No oops..
6 Recreatable error script : N/A
7.1 Environment :
output of ver_linux script
<snip>
Linux core 2.4.6 #1 Wed Jan 16 14:46:28 EST 2002 i586 unknown
Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.10.91.0.4 util-linux 2.11b mount 2.11b modutils 2.4.5 e2fsprogs 1.19 reiserfsprogs 3.x.0j pcmcia-cs 3.1.25 PPP 2.4.0 isdn4k-utils 3.1pre1a Linux C Library x 1 root root 1343073 May 11 2001 /lib/libc.so.6 Dynamic linker (ldd) 2.2.2 Procps 2.0.7 Net-tools 1.60 Kbd 1.04 Sh-utils 2.0
<snip>
7.2 CPU info : cat of /proc/cpuinfo
<snip>
processor : 0 vendor_id : AuthenticAMD cpu family : 5 model : 8 model name : AMD-K6(tm) 3D processor stepping : 12 cpu MHz : 501.151 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr bogomips : 999.42
<snip>
7.3 module info : none
7.4 Loaded driver and hardware information
from 2.4.6 (working) (/proc/ioports)
<snip>
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vesafb 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 6000-60ff : VIA Technologies, Inc. VT82C586B ACPI c000-cfff : PCI Bus #01 d000-d00f : VIA Technologies, Inc. Bus Master IDE d000-d007 : ide0 d008-d00f : ide1 d400-d41f : VIA Technologies, Inc. UHCI USB d800-d87f : 3Com Corporation 3cSOHO100-TX Hurricane d800-d87f : 00:08.0 dc00-dcff : Lucent Microelectronics Venus Modem (V90, 56KFlex) dc00-dc07 : serial(set) e000-e0ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) e400-e407 : Lucent Microelectronics Venus Modem (V90, 56KFlex)
<snip>
(/proc/iomem)
<snip>
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-03feffff : System RAM 00100000-0023776f : Kernel code 00237770-002a571b : Kernel data 03ff0000-03ff07ff : ACPI Non-volatile Storage 03ff0800-03ffffff : ACPI Tables e0000000-e3ffffff : VIA Technologies, Inc. VT82C597 [Apollo VP3] e4000000-e5ffffff : PCI Bus #01 e4000000-e4ffffff : nVidia Corporation Riva TnT 128 [NV04] e6000000-e6ffffff : PCI Bus #01 e6000000-e6ffffff : nVidia Corporation Riva TnT 128 [NV04] e6000000-e6fbffff : vesafb e8000000-e800007f : 3Com Corporation 3cSOHO100-TX Hurricane e8001000-e80010ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) ffff0000-ffffffff : reserved
<snip>
from 2.4.7 (not working) (/proc/ioports)
<snip>
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vesafb 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 6000-60ff : VIA Technologies, Inc. VT82C586B ACPI c000-cfff : PCI Bus #01 d000-d00f : VIA Technologies, Inc. Bus Master IDE d000-d007 : ide0 d008-d00f : ide1 d400-d41f : VIA Technologies, Inc. UHCI USB d800-d87f : 3Com Corporation 3cSOHO100-TX Hurricane d800-d87f : 00:08.0 dc00-dcff : Lucent Microelectronics Venus Modem (V90, 56KFlex) dc00-dc07 : serial(auto) e000-e0ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) e400-e407 : Lucent Microelectronics Venus Modem (V90, 56KFlex)
<snip>
(/proc/iomem)
<snip>
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-03feffff : System RAM 00100000-00222993 : Kernel code 00222994-0028febb : Kernel data 03ff0000-03ff07ff : ACPI Non-volatile Storage 03ff0800-03ffffff : ACPI Tables e0000000-e3ffffff : VIA Technologies, Inc. VT82C597 [Apollo VP3] e4000000-e5ffffff : PCI Bus #01 e4000000-e4ffffff : nVidia Corporation Riva TnT 128 [NV04] e6000000-e6ffffff : PCI Bus #01 e6000000-e6ffffff : nVidia Corporation Riva TnT 128 [NV04] e6000000-e6fbffff : vesafb e8000000-e800007f : 3Com Corporation 3cSOHO100-TX Hurricane e8001000-e80010ff : Lucent Microelectronics Venus Modem (V90, 56KFlex) ffff0000-ffffffff : reserved
<snip>
7.5 PCI information ('lspci -vvv' as root)
<snip>
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: e6000000-e6ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at d000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at d400 [size=32]
00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
00:08.0 Ethernet controller: 3Com Corporation 3cSOHO100-TX Hurricane (rev 30) Subsystem: 3Com Corporation 3cSOHO100-TX Hurricane Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d800 [size=128] Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at e7000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Communication controller: Lucent Microelectronics Venus Modem (V90, 56KFlex) Subsystem: Action Tec Electronics Inc: Unknown device 0500 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 (63000ns min, 3500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e8001000 (32-bit, non-prefetchable) [size=256] Region 1: I/O ports at dc00 [size=256] Region 2: I/O ports at e000 [size=256] Region 3: I/O ports at e400 [size=8] Capabilities: [f8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT 128 [NV04] (rev 04) (prog-if 00 [VGA]) Subsystem: Diamond Multimedia Systems: Unknown device 5802 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 0 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e6000000 (32-bit, prefetchable) [size=16M] Expansion ROM at e5000000 [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 1.0 Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
<snip>
7.6 SCSI/IDE info (cat /proc/ide/via)
<snip> ----------VIA BusMastering IDE Configuration---------------- Driver Version: 3.20 South Bridge: VIA vt82c586b Revision: ISA 0x47 IDE 0x6 BM-DMA base: 0xd000 PCI clock: 33MHz Master Read Cycle IRDY: 1ws Master Write Cycle IRDY: 1ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: yes yes Post Write Buffer: yes no Enabled: yes yes Simplex only: no no Cable Type: 40w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA UDMA UDMA DMA Address Setup: 30ns 30ns 30ns 120ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 90ns 90ns 330ns Data Recovery: 30ns 30ns 30ns 270ns Cycle Time: 60ns 60ns 60ns 600ns Transfer Rate: 33.0MB/s 33.0MB/s 33.0MB/s 3.3MB/s
<snip>
7.7 Other information that might be relevant to the problem
*shrug*
X.
Here are some logs that might come in handy..
A clipping from my /var/log/boot.msg
<snip>
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled <6>PCI: Found IRQ 11 for device 00:09.0 <6>ttyS04 at port 0xdc00 (irq = 11) is a 16550A
<snip>
With any kernel later than 2.4.6 this part will sometimes fail, either way the modem still won't respond unless useing 2.4.6 or earlyer..
A clipping from my /var/log/messages
<snip>
Aug 26 15:39:30 core pppd[381]: Perms of /dev/ttyS0 are ok, no 'mesg n' neccesary. Aug 26 15:39:31 core wvdial[696]: WvDial: Internet dialer version 1.41 Aug 26 15:39:31 core wvdial[696]: Initializing modem. Aug 26 15:39:31 core wvdial[696]: Sending: ATZ Aug 26 15:39:31 core wvdial[696]: Sending: ATQ0 Aug 26 15:39:31 core wvdial[696]: Re-Sending: ATZ Aug 26 15:39:31 core wvdial[696]: Modem not responding.
<snip>
this works with 2.4.6...
Please help me!!
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |