lkml.org 
[lkml]   [1999]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectinsmoding aha152x never returns in 2.3.33
Hi,

I think the subject says it all. When I try a "modprobe aha152x", the
prompt never returns in 2.3.33. lsmod shows the following (besides
lots of other modules):

aha152x 24660 (initializing)
scsi_mod 73616 0 [aha152x]

But this initializing never completes as to lsmod. However
dmesg says everything is OK:
aha152x: auto configuration: ok, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x140, IRQ=9, SCSI ID=7,
reconnect=disabled, parity=enabled, synchronous=disabled, delay=100,
extended translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi : 1 host.

So the driver itself seems satisfied whereas kmod doesn't know this.
modutils are:

peter@eduard:~ > depmod -V
depmod version 2.3.8
depmod: Can't open /lib/modules/2.3.33/modules.dep

The last message "Can't open..." is also funny, the file exists and is
world-readable. Maybe it's the unfinished insmoding.

The same configuration works fine with 2.2.13.

Greetings

Peter B


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.044 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site