lkml.org 
[lkml]   [1999]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: insmoding aha152x never returns in 2.3.33
Date
From
Keith Owens <kaos@ocs.com.au> said:
> On Mon, 20 Dec 1999 00:53:10 +0100 (CET),
> eduard.epi@t-online.de (Peter Bornemann) wrote:
> >I think the subject says it all. When I try a "modprobe aha152x", the
> >prompt never returns in 2.3.33. lsmod shows the following (besides
> >lots of other modules):

> >aha152x 24660 (initializing)

> Which says that aha152x has not returned from its initialization
> routine. It is kernel code, not insmod, that determines this.

[linux 2.3.34pre2, modutils 2.3.8-1, binutils-2.9.5.0.22 on Red Hat 6.1 here]
And ppa (Zip via parallel port) hangs too:


> [vonbrand@sleipnir vonbrand]$ /sbin/lsmod
Module Size Used by
ppa 9532 (initializing)
sd_mod 10412 (initializing)
scsi_mod 64540 0 (autoclean) [ppa sd_mod]

At the end of /var/log/messages:

Dec 20 00:49:53 sleipnir kernel: ppa: Version 2.03 (for Linux 2.2.x)
Dec 20 00:49:53 sleipnir kernel: ppa: Found device at ID 6, Attempting to use EPP 32 bit
Dec 20 00:49:53 sleipnir kernel: ppa: Found device at ID 6, Attempting to use PS/2
Dec 20 00:49:53 sleipnir kernel: ppa: Communication established with ID 6 using PS/2
Dec 20 00:49:53 sleipnir kernel: scsi0 : Iomega VPI0 (ppa) interface
Dec 20 00:49:53 sleipnir kernel: scsi : 1 host.

Note that I'm printing through the very same parport (I had loaded the lp
module before).

Somebody else reported this here too, so I'd blame SCSI.
--
Horst von Brand vonbrand@sleipnir.valparaiso.cl
Casilla 9G, Viña del Mar, Chile +56 32 672616

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.032 / U:1.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site