Messages in this thread | | | From | Robert Louis Murphy <> | Subject | PROBLEM: Can't compile kernel 2.2.29 | Date | Mon, 29 Nov 1999 19:52:19 -0500 |
| |
Compiling fails near the end after executing "make bzImage" I get: (leaving off the first hundred pages or so) "... make -C nls make[2]: Entering directory `/usr/src/linux-2.3.29/fs/nls' make all_targets make[3]: Entering directory `/usr/src/linux-2.3.29/fs/nls' gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -DCPU=686 -march=i686 -DEXPORT_SYMTAB -c nls_base.c rm -f nls.o ld -m elf_i386 -r -o nls.o nls_base.o make[3]: Leaving directory `/usr/src/linux-2.3.29/fs/nls' make[2]: Leaving directory `/usr/src/linux-2.3.29/fs/nls' make -C autofs make[2]: Entering directory `/usr/src/linux-2.3.29/fs/autofs' make all_targets make[3]: Entering directory `/usr/src/linux-2.3.29/fs/autofs' make[3]: Nothing to be done for `all_targets'. make[3]: Leaving directory `/usr/src/linux-2.3.29/fs/autofs' make[2]: Leaving directory `/usr/src/linux-2.3.29/fs/autofs' make -C devpts make[2]: Entering directory `/usr/src/linux-2.3.29/fs/devpts' make all_targets make[3]: Entering directory `/usr/src/linux-2.3.29/fs/devpts' make[3]: Nothing to be done for `all_targets'. make[3]: Leaving directory `/usr/src/linux-2.3.29/fs/devpts' make[2]: Leaving directory `/usr/src/linux-2.3.29/fs/devpts' make all_targets make[2]: Entering directory `/usr/src/linux-2.3.29/fs' gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -DCPU=686 -march=i686 -c -o open.o open.c open.c: In function `sys_truncate': open.c:129: internal error--insn does not satisfy its constraints: (insn:HI 278 319 322 (set (reg:DI 4 %esi) (if_then_else:DI (le:DI (reg:DI 1 %edx) (reg:DI 4 %esi)) (reg:DI 1 %edx) (reg:DI 4 %esi))) 405 {movdicc+2} (insn_list 130 (insn_list 134 (nil))) (expr_list:REG_DEAD (mem:DI (plus:SI (reg:SI 7 %esp) (const_int 24))) (nil))) ../../gcc/toplev.c:1438: Internal compiler error in function fatal_insn cpp: output pipe has been closed make[2]: *** [open.o] Error 1 make[2]: Leaving directory `/usr/src/linux-2.3.29/fs' make[1]: *** [first_rule] Error 2 make[1]: Leaving directory `/usr/src/linux-2.3.29/fs' make: *** [_dir_fs] Error 2"
I'm running Linux 2.2.9-27mdk KDE Version 1.1.1 User: root Version: #1 Thu Nov 25 16:31:37 EST 1999 Machine: i686
Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 7 vcs 10 misc 14 sound 15 js 36 netlink 128 ptm 136 pts
Block devices: 1 ramdisk 2 fd 3 ide 0 9 md 22 ide1
Misc devices: 135 rtc 134 apm 1 psaux
DMA-Channel used by 0 MS Sound System 1 MS Sound System 4 cascade
CPU0 0: 35198799 XT-PIC timer 1: 23598 XT-PIC keyboard 2: 0 XT-PIC cascade 4: 11633502 XT-PIC serial 5: 13421 XT-PIC MS Sound System 8: 2 XT-PIC rtc 12: 781438 XT-PIC PS/2 Mouse 13: 1 XT-PIC fpu 14: 3217161 XT-PIC ide0 15: 12 XT-PIC ide0 NMI: 0
I/O-Range used by 0000-001f dma1 0020-003f pic1 0040-005f timer 0060-006f keyboard 0070-007f rtc 0080-008f dma page reg 00a0-00bf pic2 00c0-00df dma2 00f0-00ff fpu 0170-0177 ide1 01f0-01f7 ide0 0370-0371 OPL3-SAx 0376-0376 ide1 0388-0389 mpu401 03c0-03df vga+ 03e8-03ef serial(auto) 03f6-03f6 ide0 03f8-03ff serial(auto) 0530-0533 WSS config 0534-0537 MS Sound System fcf0-fcf7 ide0 fcf8-fcff ide1
Device Type Size MountPoint Free Full /dev/hda1 ext2 994MB / 708MB 28.8% /dev/hda5 ext2 1.93GB /UserFiles 1.25GB 35.0% /dev/hda8 ext2 994MB /usr 173MB 82.6% /dev/hda6 ext2 994MB /var 928MB 06.6%
Total memory: 131174400 bytes = 125.10 MB Free memory: 3276800 bytes = 3.12 MB Shared memory: 60690432 bytes = 57.88 MB Buffer memory: 18907136 bytes = 18.03 MB
Swap memory 1077469184 bytes = 1027.55 MB Free swap memory: 1068924928 bytes = 1019.41 MB
PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel 440LX - 82443lx PAC Host (rev 3). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Prefectchable 32 bit memory at 0xf8000000 [0xf8000008]. Bus 0, device 1, function 0: PCI bridge: Intel 440LX - 82443lx PAC AGP (rev 3). Medium devsel. Fast back-to-back capable. Master Capable. Latency=96. MIN Gnt =12 Bus 0, device 7, function 0: ISA bridge: Intel 82371AB PIIX4 ISA (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 7, function 1: IDE interface: Intel 82371AB PIIX4 IDE (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64 I/O at 0xfcf0 [0xfcf1]. Bus 0, device 7, function 2: USB Controller: Intel 82371AB PIIX4 USB (rev 1). Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=64. I/O at 0xfcc0 [0xfcc1]. Bus 0, device 7, function 3: Bridge: Intel 82371AB PIIX4 ACPI (rev 1). Medium devsel. Fast back-to-back capable. Bus 1, device 0, function 0: Display controller: Texas Instruments TVP4020 Permedia 2 (rev 1). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=192.Max Lat=192. Non-prefetchable 32 bit memory at 0xfedc0000 [0xfedc0000]. Non-prefetchable 32 bit memory at 0xfd800000 [0xfd800000]. Non-prefetchable 32 bit memory at 0xfe000000 [0xfe000000].
Information Value processor 0 vendor_id GenuineIntel cpu family 6 model 5 model name Pentium II (Deschutes) stepping 0 cpu MHz 333.353613 cache size 512 KB fdiv_bug no hlt_bug no sep_bug no f00f_bug no coma_bug no fpu yes fpu_exception yes cpuid level 2 wp yes flags fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx osfxsr bogomips 332.60
OSS/Free:3.8s2++-971130 Load type: Driver loaded as a module` Config options: 0 Card config: Audio devices: 0: MS Sound System (CS4231) (DUPLEX) Synth devices: Midi devices: 0: MPU-401 0.0 Midi interface #1 Timers: 0: System clock 1: MS Sound System (CS4231) Mixers: 0: OPL3-SAx and AD1848 (through MSS) 1: MS Sound System (CS4231)
X-Server name of display : :0.0 vesion number : 11.0 vendor string : Linux Mandrake (XFreee86 3.3.3.1, X-TT 1.2.1, patches) vendor release number : 3330 default screen number : 0
screen #0 dimensions : 1600x1200 pixels (524x406 mm) resolution : 75x75 dots per inch depths (1) : 16
I don't know how much of the above info is relevant, if any isn't please tell. Please tell me if I lack vital info. Like I stated at the beginning, I think it was mostly done compiling when it failed, I don't know what "insn" so in addition to a fix or a work around I want to find out what "insn"
Thanks a million,
losmurfs@bellsoutn.net is.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |