Messages in this thread | | | Date | Sun, 01 Mar 1998 09:57:29 -0500 | From | mlord <> | Subject | Re: IDE still misbehaving in pre-2.1.89-4 [WAS: Can't set UltraDMA mode 2 on Quantum Fireball SE] |
| |
Adam D. Bradley wrote:
> Unfortunately, IDE is unstable in 2.1.85 and on, at least under SMP.
Correction: your system is unstable in 2.1.85. Cause unknown.
> I've been done this booting w/o options and with the > "ide0=noautotune" option. Haven't tried a non-SMP kernel yet.
Well.. try a non-SMP kernel then. I did receive other reports a few weeks back that newer SMP code was broken for some drivers, including IDE.
> Feb 28 23:44:50 peter kernel: hda: write_intr: status=0xd0 { Busy } > Feb 28 23:44:50 peter kernel: ide0: reset: success > Feb 28 23:44:50 peter kernel: hda: recal_intr: status=0xd0 { Busy }
After a unit reset, the hardware should no longer be "Busy". Something other than the IDE software is causing this condition.
> Twin Pentium-MMX 166's, Gigabyte MB, 64 MB EDO > > peter kernel: PIIX3: IDE controller on PCI bus 0 function 57 > peter kernel: PCI->APIC IRQ transform: (B0,I7,P-1) -> -1 > peter kernel: PIIX3: not 100% native mode: will probe irqs later > peter kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio > peter kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio > peter kernel: hda: QUANTUM FIREBALL ST3.2A, ATA DISK drive > peter kernel: hdb: MAXTOR LXT-340A, ATA DISK drive > peter kernel: hdc: TOSHIBA CD-ROM XM-5702B, ATAPI CDROM drive > peter kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > peter kernel: ide1 at 0x170-0x177,0x376 on irq 15 ... > (P.S. - 2.1.84 was rock-solid-stable, and I didn't see much in 2.1.85 > that should've touched IDE directly. IO-APIC changes maybe?
Yeah, try it without the IO_APIC support.
-- mlord@pobox.com The Linux IDE guy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |