Messages in this thread | | | From | Geetha sowjanya <> | Subject | [net-next PATCH v3 0/9] Introduce RVU representors | Date | Sun, 28 Apr 2024 16:23:03 +0530 |
| |
This series adds representor support for each rvu devices. When switchdev mode is enabled, representor netdev is registered for each rvu device. In implementation of representor model, one NIX HW LF with multiple SQ and RQ is reserved, where each RQ and SQ of the LF are mapped to a representor. A loopback channel is reserved to support packet path between representors and VFs. CN10K silicon supports 2 types of MACs, RPM and SDP. This patch set adds representor support for both RPM and SDP MAC interfaces.
- Patch 1: Refactors and exports the shared service functions. - patch 2: Implements basic representor driver. - patch 3: Add devlink support to create representor netdevs that can be used to manage VFs. - patch 4: Implements basec netdev_ndo_ops. - Patch 5: Installs tcam rules to route packets between representor and VFs. - patch 6: Enables fetching VF stats via representor interface - Patch 7: Adds support to sync link state between representors and VFs . - patch 8: Enables configuring VF MTU via representor netdevs. - patch 9: Add representors for sdp MAC
Command to create VF representor #devlink dev eswitch set pci/0002:1c:00.0 mode switchdev VF representors are created for each VF when switch mode is set switchdev on representor PCI device # devlink dev eswitch set pci/0002:1c:00.0 mode switchdev # ip link show 25: r0p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 32:0f:0f:f0:60:f1 brd ff:ff:ff:ff:ff:ff 26: r1p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 3e:5d:9a:4d:e7:7b brd ff:ff:ff:ff:ff:ff
----------- v1-v2: -Fixed build warnings. -Address review comments provided by "Kalesh Anakkur Purayil".
v2-v3: - Used extack for error messages. - As suggested reworked commit messages. - Fixed sparse warning.
Geetha sowjanya (9): octeontx2-pf: Refactoring RVU driver octeontx2-pf: RVU representor driver octeontx2-pf: Create representor netdev octeontx2-pf: Add basic net_device_ops octeontx2-af: Add packet path between representor and VF octeontx2-pf: Get VF stats via representor octeontx2-pf: Add support to sync link state between representor and VFs octeontx2-pf: Configure VF mtu via representor octeontx2-pf: Add representors for sdp MAC
.../net/ethernet/marvell/octeontx2/Kconfig | 8 + .../ethernet/marvell/octeontx2/af/Makefile | 3 +- .../ethernet/marvell/octeontx2/af/common.h | 2 + .../net/ethernet/marvell/octeontx2/af/mbox.h | 73 +++ .../net/ethernet/marvell/octeontx2/af/npc.h | 1 + .../net/ethernet/marvell/octeontx2/af/rvu.h | 30 +- .../marvell/octeontx2/af/rvu_debugfs.c | 27 - .../marvell/octeontx2/af/rvu_devlink.c | 6 + .../ethernet/marvell/octeontx2/af/rvu_nix.c | 75 ++- .../marvell/octeontx2/af/rvu_npc_fs.c | 4 + .../ethernet/marvell/octeontx2/af/rvu_rep.c | 457 ++++++++++++++ .../marvell/octeontx2/af/rvu_struct.h | 26 + .../marvell/octeontx2/af/rvu_switch.c | 20 +- .../ethernet/marvell/octeontx2/nic/Makefile | 2 + .../ethernet/marvell/octeontx2/nic/cn10k.c | 4 +- .../ethernet/marvell/octeontx2/nic/cn10k.h | 2 +- .../marvell/octeontx2/nic/otx2_common.c | 53 +- .../marvell/octeontx2/nic/otx2_common.h | 83 ++- .../marvell/octeontx2/nic/otx2_devlink.c | 47 ++ .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 305 ++++++--- .../ethernet/marvell/octeontx2/nic/otx2_reg.h | 1 + .../marvell/octeontx2/nic/otx2_txrx.c | 35 +- .../marvell/octeontx2/nic/otx2_txrx.h | 3 +- .../ethernet/marvell/octeontx2/nic/otx2_vf.c | 18 +- .../net/ethernet/marvell/octeontx2/nic/rep.c | 596 ++++++++++++++++++ .../net/ethernet/marvell/octeontx2/nic/rep.h | 51 ++ 26 files changed, 1707 insertions(+), 225 deletions(-) create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_rep.c create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/rep.c create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/rep.h
-- 2.25.1
| |